.

Advanced Multifunctional Thermal Conductivity Analyzer for Polymers

Get a quote:

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

The instrument is designed and operated in accordance with the following international and national standards:

ISO 22007-2:2008 / ISO 22007-2:2015:Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method

GB/T 32064-2015:Determination of thermal conductivity and thermal diffusivity — Transient plane heat source (TPS) method

Parameters

ItemSpecification
Thermal conductivity range 0.001 – 500 W/(m·K)
Thermal conductivity resolution 0.0001 W/(m·K)
Thermal diffusivity range 0.1 – 100 m²/s
Thermal effusivity range 0.1 – 30 W/(m²·K)
Specific heat capacity range 0.1 – 5 kJ/(kg·°C)
Thermal resistance range 0.5 – 0.000005 mm²·K/W
Temperature measurement accuracy ≤ 0.001 °C
Relative measurement error ≤ 3%
Repeatability error ≤ 3%
Test time 1 – 120 s
Sample environment temperature Standard: room temperature
Optional temperature range –40 to 150 °C / –40 to 250 °C
Power supply AC 220 V ±10%, 50/60 Hz
Total system power < 500 W
Standard probe Φ15 mm, –40 to 150 °C

Features

Direct measurement of heat transfer behavior, significantly reducing testing time

Minimal influence from contact thermal resistance compared with steady-state methods

No special sample preparation required for solid materials with relatively flat surfaces

Wide measurement range suitable for both high and low thermal conductivity materials

Flexible testing schemes and mathematical models for different material types

Effective suppression of natural convection effects during measurement

Fast testing speed with stable and repeatable results

Fully automatic testing software for data analysis and report generation

Accessories

Hot Disk sensor (standard Φ15 mm probe)

Optional probes: Φ30 mm, Φ15 mm, Φ7.5 mm, Φ4.0 mm (–40 to 250 °C)

Solid sample clamping fixture

Powder, paste, and liquid sample testing cell

Dedicated thin-sample testing configuration

Optional temperature control chamber (–40 to 250 °C)

Optional vacuum testing configuration


Отправить запрос, связаться с поставщиком

Кому: Standard International Group (HK) Limited
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

 Single Cable Vertical Flame Tester
Single Cable Vertical Flame Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com introduction Single Cable Vertical Flame Tester is used for the vertical flame propagati...
Syringe Sealing Positive Pressure Tester
Syringe Sealing Positive Pressure Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This tester is suitable for evaluating a wide range of medical devices with Lu...
Multi-function drum and reciprocating tribology tester factory
Multi-function drum and reciprocating tribology tester factory Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This testing machine is suitable for friction and wear evaluation under both l...
Aerosol Foams Flammability Tester
Aerosol Foams Flammability Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction This product complies with "Recommendations on the Transport of Dange...
Rubber Low Temperature Brittleness Tester
Rubber Low Temperature Brittleness Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com The Rubber Low Temperature Brittleness Tester determines the temperature at which rubber an...
Все товары поставщика

Похожие товары

Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением Продавец: Shandong HUASU Plastic Technology Co.,Ltd. Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ...
PanEVAP & MVR system
PanEVAP & MVR system Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
PanGAP wide gap welded plate heat exchanger
PanGAP wide gap welded plate heat exchanger Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
PanBloc welded plate heat exchanger
PanBloc welded plate heat exchanger Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
PanBox welded plate heat exchanger
PanBox welded plate heat exchanger Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...