Multi-Axis Tribometer
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Multi-Axis Tribometer is a versatile tribological testing device for studying friction and wear of materials under low to medium load conditions. It supports multiple contact configurations including pin- or ball-on-rotating-disc and pin- or ball-on-plate reciprocating tests. With a lateral indexing function, the device allows continuous exposure of fresh wear surfaces, making it suitable for fundamental tribology research and various standardized test methods.
Application
You can use this tribometer for:
Friction and wear testing of metals, polymers, rubbers, and composite materials.
Pin/ball-on-disc rotational wear tests.
Pin/ball-on-plate reciprocating wear tests.
Studying friction behavior of elastomers and rubber materials.
Evaluating the influence of lubricants on friction, wear, and stick-slip behavior.
Investigating start-up friction and dwell time effects in polymers.
Friction studies on surface coatings and functional thin films.
Simulating friction characteristics of cosmetics or skin-contact materials.
Basic tribology research in teaching and scientific laboratories.
Standards
You can perform tests in accordance with:
ASTM G119 – Guide for Wear Testing.
ASTM G99 – Pin/ball-on-disc friction and wear test.
ASTM G132 – Pin-on-disc wear test with indexing function.
DIN 50324 – Pin-on-disc friction and wear testing.
Parameters
Base Unit
| Parameter | Specification |
|---|---|
| Contact Configuration | Ball-on-flat / Pin-on-flat / Custom samples |
| Normal Load Range | 0.1 – 100 N |
| Load Measurement | Strain gauge force sensor |
| Friction Force Range | 0 – 50 N |
| Friction Measurement | Strain gauge force sensor |
| Humidity Measurement | 10 – 90 % RH |
| Drive Motor | Brushless DC servo, 200 W |
| Loading Actuator | Linear actuator, 12 V DC, 100 N |
| Indexing Actuator | Linear actuator, 12 V DC, 100 N |
| Interface | USB serial interface |
| Control Software | Proprietary control software |
| Installation | Benchtop |
| Protection | Transparent safety shield |
P-Indexed Pin-on-Disc Module
| Parameter | Specification |
|---|---|
| Contact Configuration | Ball-on-disc / Pin-on-disc |
| Disc Diameter | 100 mm |
| Track Radius | 0 – 40 mm |
| Lateral Feed Speed | 10 mm/min |
| Disc Speed | 0 – 300 rpm |
| Maximum Sliding Velocity | 1 m/s |
R-Indexed Reciprocating Module
| Parameter | Specification |
|---|---|
| Contact Configuration | Ball-on-plate / Plate-on-plate / Plate-on-hemisphere |
| Max Reciprocating Velocity | 10 mm/s |
| Max Stroke | 50 mm |
| Max Lateral Velocity | 1 mm/s |
| Max Lateral Travel | 30 mm |
| Temperature Range | Ambient – 100°C |
| Dwell Time | 0 – 8 hours |
| Temperature Sensor | Type J thermocouple |
| Heating Power | 150 W |
H High-Temperature Non-Indexed Pin-on-Disc Module
| Parameter | Specification |
|---|---|
| Disc Diameter | 75 mm |
| Track Radius | 0 – 35 mm |
| Temperature Range | Ambient – 500°C |
R/C Cooling Module
| Parameter | Specification |
|---|---|
| Minimum Temperature | −15°C (ambient water cooling) |
| Minimum Temperature | −30°C (chiller water/ethylene glycol) |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Veslic Multi-Functional Material Tester | VESLIC Tester - Precision for Leather Abrasion Resistance | Standard ISO 13934-1(Tensile Properties of Fabrics) ASTM D624(Tear Strength of Rubber and Elastomers) AATCC 135(Dimensional Changes in Textiles ... |
 |
Automotive Wire Puncture Tester | Get a quote： Whats/App: +86 181 0160 0864 The Automotive Wire Puncture Tester is designed to evaluate the insulation strength of automotive wires... |
 |
Fully Automatic High-Temperature Specific Heat Capacity Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Fully Automatic High-Temperature Specific Heat Capacity Tester is a state-of-the-a... |
 |
Film punching machine ASTM | Meet the standard: GB/T1528; GB/T529; GB/T8083; GB/T 15340.ASTM Technical parameters: Travel range :100mm Blanking force: about 20kN Table siz... |
 |
UV Fade Meter Si48 | Get a quote： Whats/App: +86 181 0160 0864 Qinsun UV Long-Life Auto Fade Meter is extensively used for colour fastness test of textile materials. ... |
Похожие товары
 |
Common Rail Injector Valve F00R J02 012 | Продавец: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
 |
Common Rail Injector Valve F00R J02 005 | Продавец: 868983 | Common Rail Injector Valve F00R J02 005 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | Продавец: 868983 | Common Rail Injector Valve F00R J01 945 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | Продавец: 868983 | Common Rail Injector Valve F00R J01 941 David Chen |
 |
Common Rail Injector Valve F00R J01 924 | Продавец: 868983 | Common Rail Injector Valve F00R J01 924 David Chen |
