ISO compliant memory impact testing machine for plastic and composite materials
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
JB/T 11343-2013：Martindale Abrasion and Pilling Tester
JB/T 5420-2014：Fabric Abrasion Tester
JB/T 6492-2014：Fabric Pilling Tester
JB/T 6491-2015：Fabric Snagging Tester
T/GDPIA 21-2020：Test Method for Abrasion and Pilling Resistance of Textiles (Martindale Method)
T/GDPIA 16-2020：Test Method for Fabric Pilling Resistance
T/GDPIA 22-2020：Test Method for Fabric Snagging Resistance
T/ZZB 1351-2019：Specification for Fabric Abrasion and Pilling Tester
T/CPMIA 0201-2022：Test Method for Abrasion Resistance of Textile Materials (Martindale Method)
Features
Screw Structure and Motion:
Conical Design: The feed section features a larger diameter, while the homogenizing section has a smaller diameter, creating a forced thrust to prevent material overheating.
Counter-Rotation: Two screws mesh in opposite directions, conveying material axially through the screw gap while applying shear force. Ideal for processing plastics like PVC and polyolefins.
Plasticizing and Extrusion Process:
Heating and Cooling: Built-in cast aluminum heaters and cooling fans within the barrel, combined with gradient temperature control technology, precisely regulate the processing temperature range.
Vacuum Degassing: Ensures uniform plasticization and minimizes bubbles and impurities through a vacuum degassing system.
Energy Efficiency and Environmental Protection:
Variable Frequency Drive: Compatible with VFD motors for energy-saving operation.
Waste Heat Recovery: Selected upgraded models incorporate waste heat recovery systems to further enhance energy efficiency.
Technical Parameters
| Category | Specification |
|---|---|
| Impact Energy | 2/4 J (simply supported beam); 2.75/5.5 J (cantilever) |
| Sampling Rate | 10 µs |
| Resolution | 16 bits |
| Load Measurement Accuracy | ≤ 1% |
| Impact Knife Angle | 30° |
| Pendulum Torque (Simply Supported Beam) | 2.1436 Nm, 1.0718 Nm, 0.5359 Nm |
| Pendulum Torque (Cantilever Beam) | 2.9474 Nm, 1.4737 Nm |
| Pendulum Pre-lift Angle | 150° |
| Simply Supported Beam | |
| Impact Speed | 2.9 m/s |
| Distance from Pendulum Shaft Center to Sample Center | 230 mm |
| Blade Angle | 30° |
| Blade Radius | 2 mm |
| Support Corner Radius | 1 mm |
| Support Front Angle | 5° |
| Support Rear Angle | 10° |
| Support Span | 40. 60. 70 mm |
| Sample Type and Size (L × W × T) | 380×10×4 mm, 50×6×4 mm, 120×15×10 mm |
| Cantilever Beam | |
| Impact Speed | 3.5 m/s |
| Distance from Pendulum Shaft Center to Sample Center | 335 mm |
| Blade Angle | 75° |
| Blade Radius | 0.8 mm |
| Front Edge Angle | 5° |
| Blade Back Angle | 10° |
| Sample Type and Size (L × W × T) | 80×10×4 mm63.5 × 12.7 × 12.7 mm63.5 × 12.7 × 6.4 mm63.5 × 12.7 × 3.2 mm |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Lowest Ignition Energy (MIE) Dust Cloud Analyzer | Whats/App: +86 156 1874 6768 Web: standard-groups.com Description： Dust Cloud Minimum Ignition Energy Tester disperses a certain mass of dust sp... |
 |
Laser compression testing equipment supplier | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) GB/T 7759-2008: Determination of compression set of rubber and rubber produc... |
 |
Suture Needle Penetration and Bending Strength Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Suture Needle Penetration and Bending Strength Tester is a device used to test the pene... |
 |
Tracking indices of solid insulating materials Test Machine ,IEC60112 | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction This tester is in accordance with IEC60112 standard . It is suitable for ligh... |
 |
Friction and wear testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com It can perform flat grinding, curved grinding, edge grinding, folded edge grinding, and abr... |
Похожие товары
 |
MMA-120 Handheld Arc Welder | Продавец: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | Продавец: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | Продавец: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | Продавец: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | Продавец: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
