Safety helmet retention failure and roll-off analysis system for ISO standards
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standard
(1)ISO 4151:Indian Standard for Protective Helmets
(2)ECE R22.05:Uniform Provisions Concerning the Approval of Protective Helmets and Their Visors for Drivers and Passengers of Motor Cycles and Mopeds
Feature
(1)Dynamic Tensile Testing: A tensile force is applied to the helmet using a tensile loading system, and the maximum tensile force is recorded to ensure the helmet does not detach during the test.
(2)Impact Testing: The helmet is worn and slid down a track to impact a rigid obstacle at a specific speed, and whether the helmet detaches is recorded.
(3)Data Acquisition: An accelerometer records the impact force on the headform, comprehensively evaluating the stability of the fastening system under dynamic impact.
(4)Safety Protection: The equipment is equipped with a safety enclosure to prevent injury from flying helmet fragments during testing.
Parameters
| Item | Detail |
|---|---|
| Mass of initial load | 3 kg ± 0.1 kg |
| Mass of falling weight | 10 kg ± 0.01 kg |
| Lowering height | 0.5 meters ± 0.01 meters |
| Measuring method | manual |
| Electricity | 220V 50HZ |
| Test theory | vertical descent |
Accessoriess
(1)Anthropomorphic headform
(2)Strap clamp
(3)Force sensor
(4)Impact drive assembly
(5)Data acquisition and analysis system
(6)Protection and limiting devices, etc.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
High temperature vacum friction & wear tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Main uses: High temperature vacuum friction and wear testing machine is mainly used to stud... |
 |
Coating thickness gauge/film thickness gauge | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard Coating Thickness Gauge complies with international standards includingASTM B499,... |
 |
Advanced Airbag-Type contact pressure tester for ASTM/ISO ergonomic material testing | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The Airbag-Type Contact Pressure Tester complies with the followin... |
 |
Bending Tester STD- FB2 - S | Whats/App: +86 156 1874 6768 Web: standard-groups.com Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength ... |
 |
AATCC 127 Hydrostatic Pressure Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The G018P Hydrostatic Pressure Tester is an upgraded version of the G018. des... |
