Automated Clutch Friction Test Machine
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The Automated Clutch Friction Test Machine is a laboratory test system designed to evaluate friction, wear behavior, and thermal performance of wet clutch friction components under controlled load, speed, and lubrication conditions. The machine operates using a single original-manufactured friction pair, allowing detailed analysis of friction characteristics that cannot be obtained from full clutch pack or small-scale specimen testing.
The system supports precise speed control, closed-loop load application, temperature regulation, and automated data acquisition, making it suitable for standardized clutch friction research and comparative performance evaluation.
Application
The Automated Clutch Friction Test Machine is used for the following applications and components:
Wet clutch friction plate friction coefficient and torque characterization
Wear and durability evaluation of clutch friction materials
Engagement and disengagement behavior analysis under cyclic loading
Testing of small-scale friction components such as thrust washers
Friction performance assessment of limited-slip differential components
Evaluation of synchronizer and torque converter friction elements
Lubricant and friction material development and validation
Thermal behavior and heat dissipation studies of friction interfaces
Research, development, and quality control in automotive and transmission industries
Standards
GB/T 13986 — Determination of Friction Characteristics of Automotive Wet Clutches
JASO M349 — Test Method for Wet Clutch Performance
ISO 6312 — Automotive Clutch Friction Performance Testing
SAE J2491 — Clutch Friction and Wear Test Method
ASTM D3703 — Determination of Friction Properties of Friction Materials
Parameters
| Item | Technical Parameters |
|---|---|
| Friction pair size | Mean friction radius 35–125 mm |
| Maximum specimen diameter | 286 mm |
| Small specimen friction radius | 15 mm |
| Speed control ratio | 100:1 |
| Drive motor | AC motor, 4 kW, encoder feedback |
| Load range (low load) | 50 – 1,000 N |
| Load range (high load) | 250 – 10,000 N |
| Load actuation | Pneumatic bellows, closed-loop control |
| Torque measurement | Strain gauge torque transducer |
| Maximum torque | 180 Nm |
| Torque arm radius | 187 mm |
| Heating method | Electrical resistance heating |
| Heating power | 3 kW |
| Temperature range | 40 – 200 °C |
| Temperature sensor | Type K thermocouple |
| Cooling method | Circulating heat transfer fluid |
| Cooling flow rate | Up to 4 L/min |
| Controlled parameters | Speed, load, temperature, test duration |
| Measured parameters | Speed, load, friction torque, temperature, friction coefficient, time |
| Power supply | 380/415 V, three phase, 50/60 Hz |
| Compressed air | 4 cfm @ 8 bar |
| Cooling water | 10 L/min (typical) |
| Machine dimensions | 600 × 800 × 1,000 mm |
| Machine weight | 400 kg |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Fabric Fiber Shedding Degree Tester (Friction Method) / Fabric Shedding Test Machine | Instrument Testing Principle Lay the specimen flat and fix it on the holder. Make the wet abrasive attached to the friction head perform reciproca... |
 |
Carpet Flammability Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk TheCarpet Flammability Testeris designed to assess the flame-retardant properties ... |
 |
Demesia Zigzag Tester / Demesia Zigzag Machine | Compliance Standards IEC60695-2-1(Firehazardtesting) ISO6722(Roadvehicles-60Vand600Vsingle-corecables) ASTMD5422(StandardTestMethodforMechanical... |
 |
Electrical bushing flame retardant tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The flame retardant test instrument for electrical bushing is used to measure the ... |
 |
Geomembrane Hydrostatic and Permeability Tester丨Geotextile Test Machine | Scope of application: It is used to test the hydrostatic pressure resistance and permeability coefficient of nonwoven composite geotextile (one cl... |
Похожие товары
 |
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding | Продавец: Beijing JCZ Technology Co., Ltd | The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre... |
 |
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal | Продавец: Beijing JCZ Technology Co., Ltd | TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig... |
 |
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner | Продавец: Beijing JCZ Technology Co., Ltd | The Suitcase Pulsed Laser Cleaning Machineis an ultra-portable, high-precision handheld fiber las... |
 |
All-in-One Fiber Laser Marking and Engraving Machine – AIO A2 for Metal Glass Plastic | Продавец: Beijing JCZ Technology Co., Ltd | The EZCAD AIO-A2 is a compact,all-in-one fiber laser marking machineengineered for versatility an... |
 |
Compact Intelligent Laser Marking Machine – Advanced Technology for High-Quality Marking | Продавец: Beijing JCZ Technology Co., Ltd | The ETF-M20/30 is a desktop fiber laser marking machinedesigned to provide exceptional marking ca... |
