Electrical Safety Material Arc Resistance Tester ASTM D495
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Comply with the standard
GB/T1411-2002 dry solid insulating material resistance to high voltage, small current arc discharge test (equivalent to IEC and ASTM D495 and other standards; in line with UL 746A and other test methods
Functional principle
Insulating materials to resist deterioration caused by high-voltage arc action, usually with a standard arc flame on the surface of the material caused by charring to the surface conductivity and the arc disappeared the time required to express the unit of seconds in the plate specimen plus two separated by a certain distance from the tungsten electrodes, depending on the need for high-frequency high-voltage current between the two poles to produce an arc, initially intermittent time is gradually shortened, and finally for the continuous arc and gradually increase the current, the material The material is subjected to gradually harsh arc conditions and eventually cause damage. Arc resistance for high-voltage switch or low-voltage high-current switch insulating materials have important significance, because in the switch opening and closing will often be subjected to arc action, only good arc resistance materials can be selected.
In electrical and electronic equipment within the insulating material when it is exposed to high voltage, small current arc discharge, between them to withstand the initial difference in the immediate surface damage occurs, arc discharge caused by local thermal and chemical decomposition and corrosion and ultimately in the insulating material on the formation of conductive channels, when the formation of conductive channels within the material under test, it can be determined that the material has failed.
Equipment parameters
1. Arc through the time error: 1/8s through 7/8s break ± 5ms, the rest of the program is better than ± 1ms
2. Regulator capacity: 1kVA
3. Rated test voltage: 12.5kV
4.Maximum test voltage: 15.0kV
5. Test voltage accuracy: <1.0%
6. Accuracy of current measurement: <1.0%
7. Electrode pressure on specimen: (0.5±0.05)N
8. Electrode material: tungsten rod
9. Electrode distance: (6.35±0.1)mm
10.Ambient temperature: (23±2)℃.
11.Ambient Humidity: (50±5)%
12. Power supply: 220V±5% 50Hz 10A
Accessories
(1)Optional components that support tester operation.
(2)Examples: electrodes, sample holders, calibration tools, protective shields, and software modules.
(3)Enhance measurement accuracy, safety, and adaptability for different materials.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
PV Module Testing Equipment Supplier – ISO UV Aging Test Chamber | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The UV Aging Test Chamber is designed to comply with international... |
 |
SAE J2527 GX75 Xenon Weathering Tester OEM Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications SUGA GX75 7.5kW Xenon Weather Meter is designed to artificially... |
 |
Automotive Cargo Cover Screw Inspection LineISO 9001，Vehicle cargo cover assembly inspection equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Automotive Cargo Cover Screw Inspection Line is an automated system designed to inspect... |
 |
Laminoplasty Plate System Fatigue Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM F2193-18: Specifies static/fatigue testing protocols for spinal constructs, ... |
 |
Hexapod Tumbler test machine | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Hexapod Tumbler test machine uses a steel ball with spikes or a hexagonal... |
