Automatic Thermal Deformation Vicat Softening Point Tester
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
This machine is a non-metallic material testing instrument designed and manufactured according to the latest international standards and national standards. It is mainly used for non-metal such as plastic, hard rubber, nylon, electrical insulating materials, long fiber reinforced composite materials, high strength thermosetting laminates. Determination of the heat distortion temperature of the material and the Vicat softening point temperature. It is easy to operate and precise in control. It is a highly intelligent test instrument widely used in colleges and universities, research institutes and product quality supervision and inspection units. It adopts single-chip control, PID phase-modulated output, with upper limit temperature setting, and automatically stops heating when the test temperature reaches the upper limit temperature..
Applications
plastic, hard rubber, nylon, electrical insulating materials, long fiber reinforced composite materials, high strength thermosetting laminates.
Standard
(1)GB/T1633《Determination of vika softening temperature (VST) of thermoplastic》
(2)GB/T1634《Determination of plastic load deformation temperature – part 1: general test method》
(3)GB/T8802《Determination of softening temperature of plastic pipe fittings》
(4)IS075-2013《Measurement of plastic load deformation temperature》
(5)ASTM D 648《Test method for temperature of plastic thermal deformation》
(6)ASTM D 1525《Plastic Vicat softening test method》
parameters
| Temperature control range | ambient temperature~300ºC |
| Heating rate | (120±10)ºC/h (12±1)ºC/6min,(50±5)ºC/h (5±0.5)ºC/6min |
| Temperature indication error | 0.1ºC |
| Temperature control accuracy | ±0.5ºC |
| Maximum deformation indication error | ±0.001mm |
| Deformation measurement range | 0-10mm |
| Number of sample racks | 3 |
| The weight of the load bar and the tray | 76g |
| Test span range | 64 or 100mm according to the standard |
| Fuel tank volume | about 13L |
| Heating medium | methyl silicone oil |
| Cooling method | built-in active air cooling or external water cooling |
| Heating power | 2kw |
| Appearance size | length 65cm*width 46cm*height 84cm |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Airflow Conditioning Environmental Chamber | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Airflow Conditioning Environmental Chamber is an advanced high-end experimenta... |
 |
2-Station Seatbelt Webbing Abrasion Tester | Get a quote： Whats/App: +86 181 0160 0864 The 2-Station Seatbelt Webbing Abrasion Tester is designed to evaluate the abrasion resistance of seatb... |
 |
Safety Helmet Electrical Insulation Tester GB/T2811 | Product Introduction: Safety hat electrical insulation performance tester used to test the electrical insulation performance of safety hat, high d... |
 |
Fabric Wrinkle Bending Tester | Get a quote： Whats/App: +86 181 0160 0864 The Fabric Wrinkle Bending Tester is a specialized instrument used to assess the wrinkle recovery prope... |
 |
Film Heat Shrinkage Tester ASTM D2732 | The film heat shrinkage rate tester is a device specifically designed to measure the shrinkage performance of film materials under heating conditio... |
Похожие товары
 |
Common Rail Injector Valve F00R J02 012 | Продавец: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
 |
Common Rail Injector Valve F00R J02 005 | Продавец: 868983 | Common Rail Injector Valve F00R J02 005 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | Продавец: 868983 | Common Rail Injector Valve F00R J01 945 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | Продавец: 868983 | Common Rail Injector Valve F00R J01 941 David Chen |
 |
Common Rail Injector Valve F00R J01 924 | Продавец: 868983 | Common Rail Injector Valve F00R J01 924 David Chen |
