Safety Helmet Roll-off Testing Equipment
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The safety helmet retention test equipment is a device used to evaluate the stability of a helmet's fit when subjected to impact. By simulating the pulling forces and impact scenarios of an accident, it accurately assesses the reliability of the helmet's retention system, providing a rigorous technical safeguard for the safety of cyclists. The equipment mainly consists of a simulated head form, a tensile loading system, an impact track, and a data acquisition system. During the test, the helmet is secured to the simulated head form according to standard wearing procedures, and the length of the helmet straps and the tightness of the buckles are adjusted to ensure a fit that matches actual wearing conditions.
Application
Apply an initial load of a certain force to the rear of the helmet. Then, let a weight specified by the standard fall from a certain height so that the impact force is also applied to the helmet. In this way, the wearing stability performance of the helmet can be evaluated.
Standard
(1)IS 4151:Indian Standard for Protective Helmets
(2)ECE R22.05:Uniform Provisions Concerning the Approval of Protective Helmets and Their Visors for Drivers and Passengers of Motor Cycles and Mopeds
Feature
(1)Dynamic Tensile Testing: A tensile force is applied to the helmet using a tensile loading system, and the maximum tensile force is recorded to ensure the helmet does not detach during the test.
(2)Impact Testing: The helmet is worn and slid down a track to impact a rigid obstacle at a specific speed, and whether the helmet detaches is recorded.
(3)Data Acquisition: An accelerometer records the impact force on the headform, comprehensively evaluating the stability of the fastening system under dynamic impact.
(4)Safety Protection: The equipment is equipped with a safety enclosure to prevent injury from flying helmet fragments during testing.
Parameters
| Item | Detail |
|---|---|
| Mass of initial load | 3 kg ± 0.1 kg |
| Mass of falling weight | 10 kg ± 0.01 kg |
| Lowering height | 0.5 meters ± 0.01 meters |
| Measuring method | manual |
| Electricity | 220V 50HZ |
| Test theory | vertical descent |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Stapler Blade Sharpness Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk It features a 7-inch K600+ core/dot-matrix 65-color 800*480 resolution touchscreen... |
 |
Standard light source sample table ISO 3664 | Standards ISO 3664:2009: Meets international standards for graphic arts and photography view conditions. DIN 6173-2: European norm for illuminant... |
 |
Falling ball rebound instrument | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The falling ball rebound instrument is designed and manufactured according to GB/T... |
 |
Nanofiber Electrospinning Device | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Nanofiber Electrospinning Device is designed to fabricate nanofibers with diam... |
 |
Safety Helmets Impact and Penetration Resistance Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Safety Helmets Impact and Penetration Resistance Tester is a dual-function tes... |
