Molten Metal Splash Resistance Tester Manufacturer ISO 9185 Standard
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Features
(1) Stainless steel enclosure with interlock door for safe operation
(2) Stepper motor controls crucible tilting, ensuring stable and repeatable pouring
(3) Adjustable pouring angle and height to meet different test requirements
(4) Compact structure suitable for laboratory environments
(5) Designed to comply with international testing standards
Accessories
(1) Crucible and holder
(2) Sample support frame
(3) PVC indicator film (simulated skin)
(4) Operation manual
Parameters
| Parameter | Specification |
|---|---|
| Test Method | Molten metal splash method |
| Dimensions | W475 × D400 × H750 mm |
| Power Supply | AC 220V, 1A |
| Control Mode | Stepper motor control |
| Pouring Angle | Adjustable |
| Pouring Height | Adjustable |
| Safety Protection | Interlock safety door |
Test Procedures
(1) Place the PVC indicator film behind the test specimen
(2) Heat the metal in a furnace (optional) until fully molten
(3) Transfer the crucible to the test position using a dedicated holder
(4) Set the required pouring angle and height
(5) Activate the stepper motor to tilt the crucible and pour molten metal onto the specimen
(6) Inspect the PVC film for signs of damage
(7) Repeat the test with adjusted molten metal quantity until minimum damage is observed
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
High and Low Temperature Low Pressure Test Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Avionics equipment testing, spacecraft vacuum thermal testing, new energy sec... |
 |
Ash Sulfur Mixing System for Diesel Fuel | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Analysis of water, ash, and sulfur content in diesel fuel is critical for qua... |
 |
Intelligent Sample Cutting Machine for ISO 13934 Textile Testing Standards Manufacturer Direct | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features High precision and speed: Accurate cutting with ±0.1 mm tole... |
 |
Spinal Pedicle Screw-Rod System Compressive Fatigue Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0857-2011 (China): Specifies compression fatigue testing protocols for spina... |
 |
Low-Load Wear Testing Machine for ASTM D1894 Standard Tribology Analysis | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Low-Load Wear Testing Machine is specifically designed to measure wear be... |
