Taber Abrasion Resistance Tester for ASTM D4060 Standard Manufacturer Direct
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Features
Digital Control Interface: LCD screen displays real-time speed (30–75 RPM adjustable) and allows manual or programmed cycle settings.
Advanced Balance System: Rear arm equipped with interchangeable counterweights (250g, 500g, 750g, 1000g) for precise pressure control, including 125g ASTM compliance.
Adjustable Vacuum System: Height-adjustable suction port adapts to materials of varying thicknesses, efficiently removing debris during testing.
Modular Abrasion Wheels: Replaceable wheels (e.g., CS-10. H-18) and sandpaper discs (S-11) cater to diverse material testing needs.
Sample Preparation Kit: Includes sample stickers (S-36) and a diamond wheel polisher for pre-test surface conditioning.
Parameters
| Parameter | Specification |
|---|---|
| Rotational Speed | Adjustable: 30–75 RPM (digital control) |
| Sample Diameter | 100 mm |
| Test Platform Diameter | 113 mm |
| Cycle Range | 1–999.999 revolutions (presettable) |
| Air Pressure | 250g (standard) |
| Weight Options | 250g, 500g, 750g, 1000g (included); 125g (optional) |
| Wheel Pressure Range | 125g, 250g, 500g, 750g, 1000g, 1250g |
| Vacuum Arm Adjustment | Height-adjustable |
| Power Supply | 220V, 50Hz |
| Dimensions | 220 (W) × 380 (D) × 300 (H) mm |
| Net Weight |
20 kg |
Test Procedures
The typical test procedure for the Taber abrasion tester includes:
1. Preparing the accessories and test sample.
2. Mounting and securing the prepared sample on the test platform.
3. Mounting the friction wheel onto the clamp and applying the balance weights to both sides.
4. Adjusting the vacuum pump's suction height and removing debris from the sample.
5. Mounting the sample at the other station of the instrument in the same manner.
6. Turning on the instrument and setting the bearing drive count on the timer.
7. Starting the instrument; the friction wheel will circulate and rub the sample at a set speed.
8. The test will automatically stop after reaching the set value. Remove the friction wheel and weights, loosen the clamp, and remove the sample.
9. The test is complete. Turn off the instrument, remove the sample for analysis and comparison to evaluate the material's abrasion resistance.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Scratch Resistance Testing Instrument | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Scratch Resistance Testing Instrument is widely used for: Scratch testing... |
 |
Knee Joint Prostheses Wear Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ISO 14243-1:2014: Specifies wear testing parameters for total knee prostheses, in... |
 |
Textile Fabric Steam Shrinkage Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The G254 Textile Fabric Steam Shrinkage Tester uses a built-in steam generato... |
 |
Scratch tester STD-KK02 | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product introduction: With the continuous expansion of the use of plastic molding products... |
 |
Micro Controll High-temperature Friction Test device | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applicable Standards When conducting tests, the microcomputer - controlled high - temperat... |
