Automotive Seat Foam BS5852 Fire Resistance Tester OEM Supplier
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Features
◆Stainless steel sample frame.
◆The dimension is 450 mm X300 mm X150mm and 450 mm X450 mm X300mm.
◆Heat-resistant wire mesh structure.
◆Stainless steel ignition tube.
◆Stainless steel test template.
◆Digital display, the accuracy of the numerical display is 0.01cm.
◆Standard wood, standard sponge and standard cigarettes.
Parameters
|
Test mode |
Automatic |
|
Test flow |
(45±2)m1/min |
|
Air pressure |
|
|
The length of air pipe |
Length 2.5~3mm, Inner diameter 7±1mm |
|
Timer |
0~999s |
|
Power supply |
AC 220V 50/60HZ |
|
Dimensions |
570x310x440mm(L x W x H) |
|
Weight |
20kg |
Test Procedures
This test must be conducted in a laboratory with standard airflow. The upholstery and filling materials are placed in a test apparatus to create a small sofa with a base and backrest measuring 90°. An ignition source is placed at the connection between the sofa's base and backrest. There are six different ignition sources, numbered 2-7. where 2-3 are gas combustion sources and 4-7 are wood combustion sources (higher numbers represent more intense ignition sources within the group).
During the gas combustion process, the smoldering time from the start should not exceed 30 minutes (60 minutes for wood combustion sources). If the test does not demonstrate charring in all directions beyond 100mm above the ignition source, the gas flame should be removed after 40 seconds (ignition source 2) or 70 seconds (ignition source 3). If there is no flame, it is permissible to continue for more than 120 seconds after the removal of the combustion tube. If there is no flame, it is permissible to continue for 10 minutes after the start of the test for ignition source 5 (13 minutes for ignition sources 6-7).
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Laboratory continuous load surface performance tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Adhesion strength evaluation of surface coatings Measurement of friction resi... |
 |
Multiphase High - temperature and High - pressure Explosion Limit Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Multiphase High-Temperature and High-Pressure Explosion Limit Tester is an instrument d... |
 |
Horizontal Combustion Tester ISO 6941 Horizontal Burning Test Equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Overview TheHorizontal Combustion Testeris a standardized instrument designed to e... |
 |
Condiment packet pressure measuring machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The design and manufacture of the pressure resistance tester for sauce packets u... |
 |
Rubber Hose Dynamic Wear Testing Equipment ASTM International | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) GB/T 12721-2007 — Determination of abrasion resistance o... |
