ASTM D1230 45 Degree Flammability Test Equipment
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
E-mail：info@standard-groups。com
Feature
45° Inclined Testing: Simulates real-world flame spread angles for accurate flammability classification.
Smart Touch Interface: Integrated printer for real-time report generation and data storage.
High-Precision Flow Meter: Ensures stable flame height (16mm ±1mm) and pressure control.
Ventilation System: Rear vent holes (φ12.7mm × 11) and top exhaust (φ12.7mm × 16) optimize airflow.
Sample Fixation: U-type clamp with knob adjustment for specimen thickness (45° tilt angle).
Durable Construction: Stainless steel burner (26# syringe needle) and corrosion-resistant components.
Technical Parameters
| Parameter | Specification |
|---|---|
| Operation Interface | Smart Touchscreen (Built-in Printer) |
| Exhaust Vent (Top) | φ12.7 mm × 16 |
| Observation Window | Transparent (Lucency) |
| Rear Vent Holes | φ12.7 mm × 11 |
| Standard Flame Height | 16 mm (Adjustable) |
| Sample Holder | U-Type, 205 mm × 76 mm (Frame: 152 mm × 38 mm) |
| Ignition Time | 1 s (Adjustable) |
| Sample Rack Adjustment | Knob Control (Thickness Adaptive) |
| Specimen Tilt Angle | 45° |
| Burner Type | 26# Standard Syringe Needle |
| Burner Dimensions | 368 mm (L) × 216 mm (D) × 356 mm (H) |
| Dimensions (L×W×H) | 420 mm × 260 mm × 526 mm |
| Weight | 35 kg |
| Power Supply | AC 220V ±10%, 50Hz |
| Burn Timer Accuracy | ±0.1 s |
Accessoriess
1. Brushing device
2. Burner (5/pack)
Test Procedures
a. Remove a sample holder containing a prepared sample from the desiccator and place it on the sample holder inside the testing apparatus. Thread the marker line through the guide hook on the sample holder plate, and then hang a weight on the marker line just below the guide loop to keep it taut.
b. Close the test chamber door. Set the timer to zero, press the start button, and the timer will begin counting, allowing the flame to contact the sample surface for 1 second. When the flame burns through the marker line attached to the upper part of the sample, the weight will fall due to the line breaking, and the timer will stop. Accurately record the burning time shown on the timer. The time from removing the sample from the desiccator to igniting the sample should not exceed 45 seconds.
c. During the test, observe the burning condition of the sample. If the burning is incomplete, observe the back of the sample for any signs of charring or melting.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Face Mask Tensile Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Face Mask Tensile Tester is designed to measure tensile strength, elongation at break, ... |
 |
Photovoltaic module damp heat test chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and... |
 |
Low-Load Wear Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Low-Load Wear Testing Machine is specifically designed to measure wear behavior under e... |
 |
Artificial turf wear tester distributor | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications You can use this tester to evaluate the abrasion resistance of: Artificial t... |
 |
Battery Isothermal Calorimeter | Whats/App: +86 156 1874 6768 Web: standard-groups.com Battery Isothermal Calorimeter is a professional instrument developed based on the principl... |
Похожие товары
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
