Combustion Flue Gas Treatment System Manufacturer

Производитель: Standard International Group (HK) Limited

Все товары поставщика

Get a quote：

Whats/App: +86 156 1874 6768

Web: standard-groups.com

E-mail：info@standard-groups。com

Parameters

Unit	Specification
Pre-filter Unit	Fiber felt (folded structure), removes large particulates; frame: aluminum/galvanized; Filtration grade: G2. G3; High-temperature and corrosion resistant, low resistance
Medium Filter Unit	Folded bag-type fine filter; frame: aluminum; Filtration grade: G3; single metal mesh support; low initial resistance, large capacity
High-Efficiency Filter Unit	Ultra-fine glass fiber filter paper; filters 0.1–0.3 μm particles; frame: galvanized or ABS; Filtration grade: H10. H13. H14; high dust capacity, low resistance
Dimensions	6400 mm (W) × 1700 mm (L) × 1800 mm (H)
Power Supply	AC 380V, 25 KW
Weight	Approximately 2.5 T

Install and check all filter units, heat exchangers, and UV lamps.

Connect the system to the combustion equipment producing flue gas.

Start circulation pump and ensure water flow to the heat exchanger.

Power on the exhaust fan and set the desired extraction rate via frequency inverter.

Begin combustion experiment; monitor gas temperature, flow, and pollutant removal efficiency.

Periodically check filter units for dust load and replace if necessary.

Ensure UV lamps and activated carbon module operate effectively for VOC and odor removal.

Inspect filters monthly; replace pre-filters and medium filters every 3–6 months depending on use.

Clean high-efficiency filters carefully to maintain filtration efficiency.

UV lamps should be checked for intensity and replaced annually or as per manufacturer’s recommendations.

Heat exchanger and water circulation system should be inspected regularly for blockages or leaks.

Check and lubricate exhaust fan bearings periodically.

Ensure activated carbon modules are replaced when adsorption efficiency declines.

	Vertical Universal Friction and Wear Testing Machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Vertical Universal Friction and Wear Testing Machine is a high-performance tribological...
	Infusion Device Leakage Tester Manufacturer	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Infusion Device Leakage Negative Pressure Tester is designed to evaluate ...
	Intervertebral Fusion Cages Shear Fatigue Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Intervertebral Fusion Cages Shear Fatigue Tester is a specialized biomechanical testing...
	pneumatic foam compression fatigue tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing ma...
	Humidifying Bottle Performance Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Humidifying Bottle Performance Tester is used to test items such as leakage, pressure r...

MMA-120 Handheld Arc Welder	Продавец: 871183	The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con...
SHX Series Circulating Fluidized Bed Steam Boiler	Продавец: Hebei Genjux Boiler Co.,Ltd	Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi...
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler	Продавец: Hebei Genjux Boiler Co.,Ltd	Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ...
DHL Series Coal-Fired Steam Boilers	Продавец: Hebei Genjux Boiler Co.,Ltd	Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b...
SZL Series Biomass Steam Boiler	Продавец: Hebei Genjux Boiler Co.,Ltd	Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi...