DN100-400mm 4\

• 
• 

Portable Valve Grinding and Lapping Machine For Safety Valves

1)grinding diameter: DN100-400mm( 4"-16" )

2)Suitable for valve seat of plane globe valve,valve seat of safety valve .

3) Spindle speed(rpm):0-900,0-2800

4)The greatest grinding depth: 850 mm

5)Power supply: 220 V/50Hz

6) Motor power: 1100W

MJ-400 Portable Valve Grinding Machineis a new generation of products that is adeveloped to adapt to on-site maintenance gate valve. It has the advantages as below: the reduction of labor intensity, improving labor efficiency, replacing imported products, educing the maintenance cost. It is widely used in petroleum, chemical industry, steel mills, power plants and so on.

1) The machine is equipped with a three - paw frame, and the machine can be fixed on the valve body at work to reduce the extra work strength and ensure the stability of the machine at the same time.

2) The front end of the spindle is equipped with a telescopic sleeve controlled by a pressure spring, and the axial pressure can be adjusted to make the spindle working in a flexible working state.

3) The main shaft output end adopts universal coupling, which can compensate the perpendicularity deviation of the machine installation to a certain extent.

4) The drive system is driven by adjustable speed motor, which can be adapted to the coarse and fine grinding of various valves, and the operation is convenient. The motor can operate in positive and negative two directions.

5) The three - paw frame is three - claw synchronizing. After replacing the sand paper, the precision of the repositioning is high.

1)grinding diameter: Dia118-Dia450mmDN100-400mm( 4"-16" )

2)used for valve seat of plane globe valve,valve seat of safety valve .

3) spindle speed(rpm):0-900,0-2800

4)the greatest grinding depth: 850 mm

5)Power supply: 220 V/50Hz

6) motor power: 1100W

1)Spindle box components: including the spindle box and universal coupling The output end of the spindle is a telescopic sleeve, and its axial pressure can be controlled by a spring.

2) Three paw rack components: three claw synchronized centering, fixed spindle

3) Working part: including all kinds of grinding disc and grinding head, which can be selected according to the needs.

Portable Relief Valve Grinder, Valve Seat Grinding Machine, Globe Valve Grinded Tool

Hot Sale Various High Quality Valve Grinder, Valve Test Bench, Pipe Beveling & Cutting Machine. The portable & Stationary Valve Grinding Machineis suitable for Gate Valve, Globe Valve, Safety Valve. As fames China Valve Seat grinded Machine, High quality and factory price will give you.

Другие товары поставщика

	M-300C Portable Gate Valve Grinding Machine ，Portable Valve Grinding and Lapping Machine For Gate Valves ， Portable Valve Grinding and Lapping Machine	M-300C Portable Valve Grinding and Lapping Machine For Gate Valves Technical Parameter 1) Grinding scope: DN100-400 mm (4"-16") 2) Applicstion:G...
	Horizontal Type SYTW600/5-32 Top Pressure Valve Test Bench， Horizontal Type Valve Pressure Test Bench ，Valve Pressure Test Bench	Horizontal TypeValvePressure Test Bench 1) Applicable to gate valve,globe valve,ball valve,Check valve and etc direct-flange connection valves 2...
	PKN-150 Portable Inner Expand Type Pipe Beveling Machine	PKN Inner Clamped Pipe Beveling Machine PKN series pipe beveling machineis an inner up mounted card type pipe beveling machine, using single p...
	MJ-400 Portable Valve Grinding and Lapping Machine for Relief Valve	MJ-400 Portable Valve Grinding and Lapping Machinefor Relief Valve 1)grinding diameter: Dia118-Dia450mm 2)used for valve seat of plane globe va...
	M-100 Portable Safety Valve Grinding Machine	M-100 Portable Safety Valve Grinding Machine Application:Cone globe valve seat,Flat Globe valve seat.Grinding scope:Cone globe valve seat: Φ...

Похожие товары

	3 Inch Ceramic Bond Hybird Transitional Polishing Pads For Concrete	Продавец: Xiamen ChinShine Industry and Trade Corporation	– Available Grits: 30, 50, 100, 200,400. – Use wet or dry. Pad Materials –...
	11A2 Стеклокерамический алмазный круг для шлифования инструментов PCD	Продавец: Henan Moao superhard material	Применение стеклокерамического алмазного круга для Pcd Специально для черновой, средней, получист...
	Колеса из смолы для стекла	Продавец: Henan Moao superhard material	Применяемые машины алмазных кругов по смоле Станок для обработки прямой кромки стекла, станок для...
	Dental milling burs	Продавец: Jinrui (Гуандун) Новые материалы Co., Ltd.	Product Advantages: Good wear resistance. 2. Complete product range, suitable for all kinds of...
	Карбонит-режущее колесо, связывающее смолу	Продавец: Хэнань Моre Superhard матэрыялы Лтд	Карбонит-связыватель (лезвие для резки) обладает свойствами вертикальных потерь, которые эффектив...