.

PCD & PCBN

E-Grind supplies the whole range of PCD blanks and PCD PCDNfor cutting tool purpose. The largest Diameter of PCD blanks and PCDN blanks available can be 55mm. Our PCD blanks and PCDN blanks provide high wearing resistance ability and high finishing surface.

Application of PCD Blanks

Our plant installs laser cutting machines and surface lapping and finishing machines to provide full service for PCD. With advanced inspecting machines of SEM, C-SCAN, X-Ray Diffractometer etc. Our plant applies strict Quality Control process.

Non-ferrous metals and alloys: Aluminum/gray iron composite, copper, Aluminum...

Nonmetallic materials: ceramics, plastic, rubber, chipboard...

PCD disc

Product

Diamond Content (Vol%)

Product Properties

Application

ET02

≥92

Very good electrical discharge machining, general life, better heat resistance and impact resistance.

Superfinishing, excellent surface processing quality for copper, bronze, aluminum, magnesium, magnesium aluminum alloy, plastic, precious metals, etc.

ET05

≥92

Very good electrical discharge machining, general life, better heat resistance and impact resistance.

Superfinishing, excellent surface processing quality for copper, bronze, aluminum, magnesium, magnesium aluminum alloy, plastic, plexiglass, etc.

ET10

≥95

Good electrical discharge machining, long life, better heat resistance and impact resistance.

Fine machining, very good surface processing quality, for aluminum alloy (Si content<12%), copper alloy, composite wood processing, high-precision wear-resistant corbelled device, etc.

ET25

≥95

Good electrical discharge machining, long life, better heat resistance and impact resistance.

Used for composite, laminate flooring, nonmetal hard and brittle materials, carbide alloy, graphite and graphite composites, aluminum silicon alloy (Si content>12%), the other high wear-resistant materials, such as ceramics, carbide, etc.

ET35

≥95

Good electrical discharge machining, very long life, good heat resistance and impact resistance.

Used for resin, composite materials, fiber reinforced plastics, high density reinforced board, silicon aluminum alloy and other high wear-resistant materials.

ET302

≥95

Good electrical discharge machining, long life, better heat resistance and impact resistance.

Used for composite, laminate flooring, nonmetal hard and brittle materials, carbide alloy, graphite and graphite composites, aluminum silicon alloy (Si content>12%), the other high wear-resistant materials, such as ceramics, carbide, etc.

Available specification

Grain size

Application

Grade

Diameter

Total thickness

DIamond table thickness

Woodworking

Metalworking

Conductive

Ultra-fine micron structure for excellent surface finish requirements,

ET085

45

55

2μm

For good surface finishing

ET02

45

55

5μm

ET05

45

10μm

General purpose, balance cutting efficiency and life

ET10

45

55

25μm

Good wear resistance production,for high Si% Al alloy.

ET25

45

55

302μm

ET302

45

55

35μm

ET35

45

55

PCBN (Polycrystalline Cubic Boron Nitride)

PCBN consists of CBN and Binder. It is produced in high pressure and high temperature. It has excellent performance in hardness, wearing resistance, thermal stability.

Application: for hard ferrous materials (hardened steel, cast iron, high-temperature alloy, HSS, Powder metallurgy metals, Ni-Cr alloy...

E-Grind provides two series of PCBN:

1) Solid CBN

2) CBN with Tungsten Carbide supporting.

PCBN and SBN Grade

Grade

CBN grit (μm)

CBN content (Vol%)

Processing way

Application

SBN95Z1 PCBN95Z1

20、30

Continuous cutting with large stock removal

For Rough processing Grey Cast Iron, Chilled Cast Iron, Powder Sintered Alloy.

SBN90Z PCBN90Z

10、15

Continuous cutting with large stock removal

For Rough process and semi-finishing processing the wear resistant cast iron, nodular cast iron etc.

SBN90Z2 PCBN90Z2

10、15

Continuous cutting with large stock removal

For rough processing and semi-processing alloy cast iron, high nickel Chrome, high chrome iron and chilled steel with hardness HRC45-50.

SBN80G

3、5

Continuous cutting with Medium stock removal

For rough processing and semi-processing alloy cast iron, high nickel Chrome, high chrome iron and chilled steel with hardness HRC45-50.

SBN70G PCBN70G

3、5

Continuous cutting with small stock removal

For finishing the chilled steel and high temperature alloy with HRC45-55.

SBN60G

1、3

Continuous cutting with small stock removal

For finishing and super-finishing the chilled steel with HRC55-62 like bearing steel, tool steel, mold steel, gauge steel and HSS.

SBN55G1 PCBN55G1

1、3

Slight non-continuous and continuous cutting with small stock removal

For Finishing and super-finishing the chilled steel with HRC55-65, like bearing steel, tool steel, mold steel, gauge steel and HSS.

PCBN Blanks

Available specifications

SPEC

D(Diameter) (mm)

T(Thickness)(mm)

t (CBN section thickness)(mm)

PCBN55G1

PCBN70G

PCBN90Z

PCBN90Z2

PCBN95Z1

Ф45×1.2×0.6

45

Ф45×1.6×1.0

45

Ф45×3.2×1.0

45

Ф45×3.8×1.0

45

Ф45×4.5×1.0

45

E grindis a professional superabrasive ltd, we provide superabrasive, pcbn material, pcd cutting tool blanks, material pcd, pcd sales, pcd metal, pcd products, pcbn cutting tools, diamond diesand etc. For what is abrasive powderor more information, please feel free to contact us!



Отправить запрос, связаться с поставщиком

Кому: Henan E-Grind Abrasives Co., Ltd.
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Metal Bond Mesh Diamond
Metal Bond Mesh Diamond Metal Bond Diamonds E-Grind's metal bond mesh diamondcombines both using life and working efficiency. Suitable for resin bond, vitrified bond, me...
Diamond Powder
Diamond Powder Diamond is a mineral made of pure carbon and the hardest substance in the natural world. It can not only be processed into valuable jewelry but als...
Saw Grit Diamond
Saw Grit Diamond E-Grind's Saw Diamond Grit series are with cube-octahedron particles, for stone and construction engineering industries such as Granite, Marble, Co...
CBN Micron Powder
CBN Micron Powder As one of the china abrasivespowder suppliers,E-Grind supplies all types of diamond powder including Resin bond diamond, Metal bond diamond, CVDdia...
Poly (Polycrystalline Diamond Powder)
Poly (Polycrystalline Diamond Powder) Buy diamond micro powder from E-Grind. As a superabrasive ltd, E-Grind produces high-quality polycrystalline monocrystalline diamond powder. Avai...
Все товары поставщика

Похожие товары

Картридж фильтра с высоким расходом для очистки воды 3 м Hf60PP070d01
Картридж фильтра с высоким расходом для очистки воды 3 м Hf60PP070d01 Продавец: Lefilter Описание продукта Картридж фильтра с высоким расходом для очистки воды 3 м Hf60PP070d01 Фильтрующ...
TSP(Thermally Stable Polycrystalline Diamond)
TSP(Thermally Stable Polycrystalline Diamond) Продавец: Henan E-Grind Abrasives Co., Ltd. Key Features and Application of Thermally Stable Polycrystalline Diamond Thermally Stable Poly...
Diamond Wire Drawing Die Blanks
Diamond Wire Drawing Die Blanks Продавец: Henan E-Grind Abrasives Co., Ltd. E-Grind is a professional PCD wire drawing dies supplier and manufacturer, we provide two series ...
PDC (Polycrystalline Diamond Compact) Cutter
PDC (Polycrystalline Diamond Compact) Cutter Продавец: Henan E-Grind Abrasives Co., Ltd. E-Grind produces high-quality Polycrystalline diamond composite(PDC) and polycrystalline diamond ...
E-Grind Superabrasives Product
E-Grind Superabrasives Product Продавец: Henan E-Grind Abrasives Co., Ltd. E grindis a professional superabrasive ltd, we provide superabrasive, pcd diamond cutting tools, ...