600T overhead launching gantry crane from manufacturing company
600T overhead launching gantry crane
600T overhead launching gantry crane was developed and designed by our Shenghua Design Department for high speed railway bridges construction (250 km/hour and 350 km/hour). The maximum capacity of overhead launching gantry crane is 600 ton. 600T overhead launching gantry crane has the strength of being light weight, good stability, precise self positioning, precise beam positioning and easy operating. 600T overhead launching gantry crane comes with Centralize control system, Multi speed Crane, Hydraulic powered Support, Mechanical powered Self Advancing system and spare-parts.
Our 600T overhead launching gantry crane lifts, transport and position the Full Span Bridge in few simple steps. Shenghua’s scope of delivery of FSM equipment covers the design and supply of the complete range of equipment typically needed in such constructions: Special formwork with inner mound(hydraulically maneuvered),Lifting cranes for pre-cast yard, Lifting cranes for pre-cast bridge span ,Multi-axle tyre trolly,FSMlauncher.
Packing &Delivery
Packing:
1. Electric parts are packed by high quality plywood crate, to reduce distortion in conveying;
2. Main beams, end beams and electric hoist are packed by plastic woven cloth. It can reduce abrasion when transport.
Delivery:
1. If the size of whole 600T overhead launching gantry crane is suitable for container ship, usually by container;
2. If the size is too big, usually by bulk ship or by container after truncation;
3. Transport ways are based on reducing cost for you and keep the crane performance!
Our Company
Henan Shenghua Heavy Crane Group is a big enterprise specialized in researching, developing, producing and exporting.
It mainly produces 600T overhead launching gantry crane, overhead crane and gantry crane, beam launcher, movable scaffolding system crane, form traveller, straddle carrier, tyre transporter, beam trolley, portal crane and electric winch, electric hoist and all kinds of accessories, which widely cover machinery, metallurgy, electric power, railway, water conservancy, ports, terminals and other industries.
Shenghua Heavy Crane Group have more than 600 staff, and covers 200,000 square meters.
Our advantages:
1. More than 50 R&D personnel with advanced Science and technology.
2. More than 400 sets advanced Production processing equipment and inspection equipment.
3. Independent intellectual property rights to develop energy saving bridge cranes, gantry cranes, and electric hoist.
4. Obtain ISO 9001 certificate and more than 10 series of patent certificates.
5. Efficient service and competitive products.
6. Export more than 100 countries.
FAQ
1. What’stheinformationshouldIprovidewheninquiry about the 600T overhead launching gantry crane?
1.1 We need the Bridge Drawing, the Maximum longitudinal slope and the Maximum Transverse slope.
1.2 The Girder/beam drawing.
2.What are inspection standard for load test of 600T overhead launching gantry crane?
Dynamic load test
1.1 times rated load, main girder does not down deflection, all mechanisms work well, performance parameters meet the design demand, all limit switches and safety protection interlock devices are reliable, all spare parts does not have cracking and flexible connection, all motors and contactors are not overheat.
Static load test
1.25 times rated load, all mechanisms work well, the crane stops 20-30 min as trial load is lifted 10 cm high, then measure main girder down deflection(theodolite, ruler). Put down trial load to measure main girder upper camber, repeat 3 times, steel structure does not have permanent deformation.
3. How to make highway bridge concrete girders?
Highway Bridge concrete girders could be made by 4 methods:
3.1 Full span prefabrication.
3.2 Segment girder prefabrication.
3.3 Full span cast-in-place girder.
3.4 Segment cast-in-situ.
4. How about maintenance of 600T overhead launching gantry crane?
4.1 Lubricating: Working performance and service life of all mechanisms of crane depend on lubricating to a big extent.
4.2 Steel wire rope: Fracture of wire has to be specially noticed. A new steel wire rope has to be changed immediately with the condition of broken wire, broken strands and wear loss to scrapping standard.
4.3 Spreader: The spreader has to be checked regularly
4.4 Pulley block: Mainly check rope race wearing condition, check whether wheel flange is cracked and whether pulley could get stuck in the axle or not
4.5 Wheels: Regularly check wheel flange and tread, a new wheel has to be immediately replaced as crack part or wearing in wheel flange reaches 10% of wheel thickness; Re-polishing has to be done as diameters between two driving wheels on tread differs more than D/600, or there are severe scar on the tread
4.6 Brake: Check one time per shift; The brake should be in accurate movement, and pins do not allow to be stuck. Brake shoes shall fit brake wheels correctly; the brake shoes interval shall be equal to open them.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
High efficiency 5t cd1 md1 type wire rope electric hoist | 5t cd1 md1 typeChina HSHCL wire rope electric hoistis the most popular hoist for single girder overhead cane, because of their characteristics of t... |
 |
low price low headroom workshop wire rope electric hoist | low headroom workshop wire rope electric hoistis the most popular hoist for single girder overhead cane, because of their characteristics of tight ... |
 |
Hot sale electric hoist 10t with wireless remote control | Electric hoist 10t with wireless remote control Electric hoist 10t with wireless remote controlis the most popular hoist for single girder overhea... |
 |
remote control for new design wire rope 15t electric hoist price | Electric hoist is the most popular hoist for single girder overhead cane, because of their characteristics of tight structure, smart body, safety a... |
 |
20ton double speed cd1 electric wire rope hoist with remote control | Electric hoist is the most popular hoist for single girder overhead cane, because of their characteristics of tight structure, smart body, safety a... |
Похожие товары
 |
Монорельсовая электрическая канатная таль со стандартной высотой | Продавец: KunFeng heavy industry (suzhou) co., LTD. (KF CRANE) | Монорельсовые электрические канатные тали широко используются на заводах, в шахтах, доках, склада... |
 |
Ленточные подъемники для чистых помещений | Продавец: KunFeng heavy industry (suzhou) co., LTD. (KF CRANE) | Ленточные тали KUNFENG для чистых помещений, предназначенные для пищевой, химической и полупровод... |
 |
Электрическая лебедка серии PA | Продавец: QINGYUAN COUNTY LUDE HOISTING MACHINERY MANUFACTURING CO.,LTD | Электрическая лебедка серии PA 1. Миниатюрный электрический подъемник отличается продуманным диз... |
 |
marine crane | Продавец: Jiangsu OUCO Heavy Industry and Technology Co.,Ltd | The OUCO Marine Group provides high quality handling solutions and access systems for the marine ... |
 |
marine crane | Продавец: Jiangsu OUCO Heavy Industry and Technology Co.,Ltd | The OUCO Marine Group provides high quality handling solutions and access systems for the marine ... |
