.

Air Driven Air Booster Pump

GAB02 gas amplifier is suitable for the working environment that needs to increase the pressure of the original air compressor system. It can increase the pressure of the workshop air supply system. It only needs to use the compressed air in the working system as the air source.

ODMT air driven air amplifiers can be applied in air-pressured system when it needs to amplify the pressure. These amplifiers can increase the air pressure to 2-5times. The compressed air in the working system is the air source. This kind of pump is suitable for single air source pressurization.

◆Maximum working pressure up to 40 bar

◆Maximum flow: 1.350Ln/min

◆No additional energy consumption when the set pressure is reached.

◆No electricity required. (It can be used in areas that need explosion-proof.)

MAB02 air booster pump uses a single gas-controlled unbalanced gas distribution valve to achieve the reciprocating movement of the pump. All are made of aluminum alloy and stainless steel. The seals used are internationally high-quality products. The service life of the pump is recommended to drive air pressure ≤8bar. The driving piston diameter of this pump is 100mm, which is a double driving pump.

Driving air source: clean compressed air;

Type: Air booster pump;

Driving compressed air pressure: 2-8bar;

Maximum output air flow: 580Ln / min;

Maximum output air pressure: 16bar;

Applicable medium: clean air;

Minimum air inlet pressure: 2bar;

Maximum air inlet pressure: 16bar;

Maximum noise index: 79db;

Maximum operating temperature: 60 ° C;

Drive air inlet size: G3 / 8 ";

Air suction port size: G3 / 8 ";

High-pressure air outlet size: G3 / 8 ";

Equipment net weight: 4.2kg.

Dimensions: 346mm * 86mm * 93mm

MAB02 Working Curve



Отправить запрос, связаться с поставщиком

Кому: JINAN ODMT FLUID CONTROL EQUIPMENT CO., LTD.
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

CNC Busbar Processing Machine
CNC Busbar Processing Machine 一、CNC Busbar Processing Machine Product description This series CNC busbar processing machine has three units: punching, shearing and bending. ...
Transformer Winding Wire Machine
Transformer Winding Wire Machine The equipment is mainly composed of main box, base, rear tailstock and electrical control. Application: High and low voltage power transformer wi...
Clinching Machine
Clinching Machine ODMT-Clinching Technogy Our clinch procedure is a proven substitute for welding, screwing & riveting. Clinching: Riveting without rivets! Cl...
Pneumatic Hydraulic Cylinder
Pneumatic Hydraulic Cylinder Application:general Fast Approach/Return Strokes High Stroke Frequencies Pneumatic Forces: 2 – 1000 kN Total stroke :up to 300 mm Power ...
ЧПУ трансформатора провод замотки машины
ЧПУ трансформатора провод замотки машины 1 Àэта машина принимает трудный редуктор шестерни механической системы передачи, с высокой эффективностью и менее 70 дБ 2、двигатель имеет функц...
Все товары поставщика

Похожие товары

ЧПУ трансформатора провод замотки машины
ЧПУ трансформатора провод замотки машины Продавец: JINAN ODMT FLUID CONTROL EQUIPMENT CO., LTD. 1 Àэта машина принимает трудный редуктор шестерни механической системы передачи, с высокой эффе...
Transformer Winding Wire Machine
Transformer Winding Wire Machine Продавец: JINAN ODMT FLUID CONTROL EQUIPMENT CO., LTD. The equipment is mainly composed of main box, base, rear tailstock and electrical control. Appli...
CNC Busbar Processing Machine
CNC Busbar Processing Machine Продавец: JINAN ODMT FLUID CONTROL EQUIPMENT CO., LTD. 一、CNC Busbar Processing Machine Product description This series CNC busbar processing machine...
Clinching Machine
Clinching Machine Продавец: JINAN ODMT FLUID CONTROL EQUIPMENT CO., LTD. ODMT-Clinching Technogy Our clinch procedure is a proven substitute for welding, screwing & ...
Pneumatic Hydraulic Cylinder
Pneumatic Hydraulic Cylinder Продавец: JINAN ODMT FLUID CONTROL EQUIPMENT CO., LTD. Application:general Fast Approach/Return Strokes High Stroke Frequencies Pneumatic Forces: 2 &...