.

Dynamic Temperature Control Systems


Thechiller temperature controllerof the dynamic temperature control system is completed by the single chip microcomputer, and the digital PID control algorithm is used to control the process. The heating device has small heat inertia, high temperature control precision and fast speed electrothermal film controlled by the output of the control signal of the fault rate by the single chip microcomputer.

Valve installation steps and precautions in a chiller dynamic temperature control system

In the industrial chiller refrigeration system, the main role of the valve is to control the flow and direction of the refrigerant. In daily use, it also needs to use the valve frequently. When the industrial chiller needs to stop or start, it all needs to use the valve. What does this process need to pay attention to? The following Guanya Refrigeration will take everyone to know the experience of using the chiller system:1. the valve should be installed in a place where is easy to disassemble and maintain. When all kinds of valve install, it must pay attention to the flow of refrigerant, can not be installed against.2. When installing flanged valves for industrial chillers, flanges and flanges of valves must be made of high-pressure asbestos plates. The thickness of high-pressure asbestos plates is determined by the depth of the flange grooves on the valves. When the valve is large and the groove is deep, a thicker asbestos plate is used to prevent the concave and convex interfaces between them from being easily gapped and not sealing tightly. When assembling flanged valves, be sure that all bolts are subjected to uniform forces. Otherwise, the concave and convex interfaces are easily deflected.3, install the cut-off valve, it should make the working fluid flow from the bottom of the valve to the upper part. When installing on a horizontal line, the stem should be either vertically upward or inclined at an angle to forbid the stem from facing downwards. If the valve position is difficult to reach or the position is high, the stem can be installed horizontally for ease of operation.4. When installing the check valve for the industrial chiller, it is necessary to ensure that the valve core can be automatically opened. For lift check valves, the spool centerline should be perpendicular to the horizontal plane. For the swing check valve, the rotation of the valve plate should be guaranteed, and the valve plate must be installed horizontally.5. The safety valve shall be installed directly on the stop valve at the outlet of the device. The arrow on the valve body shall be consistent with the flow direction of the working fluid.6. The solenoid valve must be installed horizontally at the exit of the equipment. It must be installed according to the position specified in the drawings. If the solenoid valve is installed before the throttle valve, the distance between them should be at least 300mm.



Отправить запрос, связаться с поставщиком

Кому: 719774
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Ultra Low Temp Freezer DW -120℃~-150℃
Ultra Low Temp Freezer DW -120℃~-150℃ Description: Ultra-low temperature freezer mainly used for scientific research, special materials of low-temperature test and preservation; freezin...
Glycol Cooling Heating Control System
Glycol Cooling Heating Control System Application: The tested object is attached to a test platform adapter. The inside of the part was cooled and heated by an aqueous solution of ethyl...
Semiconductor Temperature Controlled Circulating Air System
Semiconductor Temperature Controlled Circulating Air System Temperature control range:-85 ° C ~ 125 ° C Power range:3.5kW~10kW Temperature control accuracy:±0.2°C Applications: 3, can work...
Plate Freezer
Plate Freezer Information: Refrigeration system high and low-pressure protection and display; Condensing temperature display and protection; A variety of fault a...
Low Temperature Chiller LN -60℃~-10℃
Low Temperature Chiller LN -60℃~-10℃ We know that thelow temp process chillersare complicated equipment. Even the switch process, if not according to the standard of operation or with ...
Все товары поставщика

Похожие товары

FHC136 Water Cooled Plate Heat Exchanger
FHC136 Water Cooled Plate Heat Exchanger Продавец: Zhejiang Forwon Plate Heat Exchanger Co., Ltd Brand Name:Forwon Model Number:FHC136 Place of Origin:Zhejiang, China (Mainland) Structure:Plate ...
Boxed Type Air-cooled Chiller
Boxed Type Air-cooled Chiller Продавец: SCY chiller It is manufactured by modern advanced technology with excellent quality and beautiful appearance....
конденсатор плиты палладия alfa laval gasketed Titanium
конденсатор плиты палладия alfa laval gasketed Titanium Продавец: Компания по производству теплообменного оборудования Циндао Риптер Лтд., Китай Полусварной пластинчатый конденсатор 1/1 Полусварной пластинчатый конденсатор Максимальная устано...
высокопроизводительный 254 smo жидкий полусварной испаритель Alfa Laval
высокопроизводительный 254 smo жидкий полусварной испаритель Alfa Laval Продавец: Компания по производству теплообменного оборудования Циндао Риптер Лтд., Китай Принцип продукта Принцип работы пластинчатого испарителя состоит в том, чтобы сжимать вторичный п...
ss 304 alfa laval производитель пластинчатых теплообменников с серной кислотой
ss 304 alfa laval производитель пластинчатых теплообменников с серной кислотой Продавец: Компания по производству теплообменного оборудования Циндао Риптер Лтд., Китай Пластинчатый теплообменник с двойными стенками 1/1 Двухстенный пластинчатый теплообменник Максим...