High Frequency Dryer For Corner Ring Insulation Cardboard

• 

Explore More Insulation Cardboard Drying Machines Products

The high-frequency drying equipment developed by our company for high voltage transformer's insulation board

It is an advanced process method to dry and mold the insulated board with high-frequency electric field.

This production method has many obvious advantages compared with the traditional steam, electric drying, and hot air processing methods.

The high-frequency drying equipment developed by our company for high voltage transformer's insulation board is advanced in technology and perfect in function. For many years, it has been applied to a large number of large enterprises at home and abroad. All get well received by users both at home and abroad.

Unlike traditional heating, high-frequency heating uses the strong penetration ability of high-frequency electric field (high-frequency electric field penetrability is far stronger than microwave), which makes the material molecules repeatedly polarized, resulting in severe friction and self-heating from inside to outside. It does not require any preheating and heat conduction, so its heating efficiency is very high.

In addition, high-frequency heating is superior to traditional drying and microwave drying, that is, the electric field can realize selective heating through mold, concentrate energy on the location where heat is needed, and further avoid unnecessary consumption.

Therefore, it can not only greatly save energy, but also greatly shorten the heating time and improve the production efficiency.

Angle ring heating time usually chord length 550mm and thickness 2.5-3mm of not more than 6 minutes, chord 700mm angle ring heating time is 8 minutes. If the multi-layer material is dried together at the same time, the cost will be reduced more.

Because in the heating process, the material of the water evaporated quickly, and the heat dissipation condition is better than the inner surface, the inner temperature will be slightly higher than the outer layer, according to the material drying theory: with heating process, maintain steam pressure and heat transfer in the same direction is most conducive to the drying of materials.

This heating method not only makes the internal fast and thorough but also completely avoids the phenomenon of the external coke.

Because of the high-frequency electric field heating both inside and outside, it is more suitable for the insulation material or multi-layer material to be heated at the same time.

When the material is heated in the high-frequency electric field, the equipment will put pressure on the mold, so that the material in the water was a lot of extrusion and molding in the electric heating at the same time.

In this process, if the material itself contains impurities like metal powder with low insulating, impurity will produce high temperature overheating and even breakdown insulating board in the high-frequency electrical field. At this time the equipment will warn alert，and start the protection system so that the disqualified material is eliminated during the heating process.

Ensure the quality of the product so that it is suitable for higher insulation requirements.

This high-frequency drying equipment does not require any auxiliary equipment. After electrifying and material loading, the whole drying process can be completed by pressing a button. The operation is very simple.

There is no pollution to the environment. Without any dust, smoke or high temperature.

The national high-frequency electric field leakage standard: 25V/m, our company's equipment is tightly shielded by various protection technologies. The measured leakage value is only 0.2-1V/m, which is 20 times better than the national standard. Effectively protect the human body and protect other equipment from the high-frequency electric field.

Liaoning Unify High-Frequency Equipment Co., Ltd. is a renowned Chinese welding machine supplier, we provide high frequency welding pvc, hf welder for sale, high frequency pvc welder, cardboard insulationand etc. Want to know more? Please contact us.

Другие товары поставщика

	High Frequency PVC Door Curtain Welding Machine	Explore More HF Welders Products Flexible Organ Shield Welding Machine can be used for high-frequency thermal bonding, embossing: inflatable toys, ...
	HF Welders 2019	Are you lookinng for high frequency welding machines for sale? The theory of radio frequency sealing equipment: Under the effect of the high freq...
	Inflatable Products Welders	The scope of inflatable product high-frequency welding machine in LiaoningYufei company can be used as follows: inflated Toys welding medical bag...
	HF Welders-2020	The theory of radio frequency sealing equipment: Under the impact of the high frequency electric field, the positive and poor charges of the sub...
	Industrial Belt Welder	Mainly application of Industrial Belt Welder Used for industrial belt skirt and belt baffles welding, welding industrial conveyor belt conveyor bel...

Похожие товары

	Интеллектуальная прецизионная паяльная станция Aixun T320 с ручкой T245/210	Продавец: ШЭНЬЧЖЭНЬСКАЯ ТЕХНОЛОГИЯ PHONEFIX, LTD (КИТАЙСКИЙ PHONEFIX)	Описание JCID Aixun T320 Интеллектуальная интегрированная прецизионная паяльная станция с ручкой ...
	JTX Nano Conductive Silver Paste For Phone Screen Line Circuit Repair	Продавец: Phonefix	JTX Nano Conductive Silver Paste repairs iPhone screen/green screen/white screen lines issues cau...
	ATTEN ST-862D 1000 Вт термофен цифровой дисплей паяльная станция BGA	Продавец: PHONEFIX technology Co.,Ltd	ОписаниеATTEN ST-862D бессвинцовая паяльная станция термофен для печатных плат BGA инструмент для...
	XZZ FX-210 Бессвинцовая паяльная станция 2S Быстрый нагрев	Продавец: ШЭНЬЧЖЭНЬСКАЯ ТЕХНОЛОГИЯ PHONEFIX, LTD (КИТАЙСКИЙ PHONEFIX)	Паяльная станция SUGON T26D с паяльником JBC C210. ​​Станция для пайки BGA без свинца. Прецизионн...
	YCS S1-160W Soldering Station Compatible T210 T115 T245 Handle	Продавец: Phonefix	YCS S1-160W 110V-220V Digital Soldering Station with automatic sleep function compatible with T24...