MMA Welding Machines
:
MMA welding machines bring low cost and high versatility to site welding, off-shore, maintenance and repair and many more industries
Also known as shielded metal arc welding (SMAW) or simply stick welding,is an inexpensive welding process. Using a consumable, flux-covered electrode and a ground clamp, a short-circuit is intentially made on the weld piece. An electric arc forms between electrode and workpiece, which heats up enough to melt both. As the electrode melts, the flux coating on the electrode develops gas and slag, which help protect the weld pool. The gas keeps air and other pollutants away, while slag forms on top of the weld pool to protect the weld seam. The slag cools down and solidifies rapidly, protecting the weld area after the gas has disappeared. This combination makesideal for windy conditions (outdoor use) which might effect other welding processes.
|
TechnicalParameters |
MAX ARC 405 |
|
Rated Input Voltage (V) |
3PH200V~440V±15% |
|
Power Frequency(Hz) |
50/60 |
|
Rated Input Current（A） |
55 |
|
Rated Input Power(KVA) |
21 |
|
No-load Voltage(V) |
78 |
|
Welding Current(A) |
40-400 |
|
Duty Cycle |
60%/400A |
|
100%/310A |
|
|
Efficiency（Rated conditions） |
≧0.85 |
|
Wire Diameter（MM） |
|
|
Insulation Grade |
F |
|
Protection Class |
IP21S |
|
Dimensions(mm) |
645x325x680 |
|
Net Weight(Kg) |
47 |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
ADVAN AC\DC TIG 315D.P Wide Input Voltage Welding Machines | ProductFeatures: function; wide adjust range of pulse frequency AC or DC—What’s the Difference? Polarity describes which way the e... |
 |
CUT 60C Cutting Machines | Model/Parameters CUT 60C1 CUT 60C3 Rated Input Voltage (V) AC220V AC380V Power Frequency(Hz) 5... |
 |
DC Pulse TIG Welding Machines | Common specificationfor Optimized for welding for steel, stainless, and aluminum Pulse feature, Optimized for special welding and pipe making Full... |
 |
DC TIG Welding Machines | TIG (tungsten inert gas) welding is used to make precise, critical welds when joining metals such as mild steel, aluminum, or stainless steel.is a... |
 |
AC DC Pulse TIG Welding Machines | Advanced double inverter technology. Three phase power supply, light weight. HF ARC start for TIG, ARC force for MMA, 2t/4t and pulse control fun... |
