YZYX120 Screw Oil Press
YZYX120 series are commonly use for oil processing workshop, which also suit for oil mill factory. It has the low oil content of the dry cakes after pressing, which can arrive at less than 6%, is much lower than the national standard 8%.
Main equipment parameters of YZYX120 Screw Oil Press
Item |
YZYX120 |
YZYX120J |
YZYX120SL |
Processing Capacity(t/24h) |
7 |
7 |
|
Oil Content of Dry Ckes(%) |
≤7.0 |
≤6.0 |
≤6.0 |
Motor Power(kw) |
11 or 15 |
11 or 15 |
11 05 15 |
Weight(kg) |
680 |
718 |
808 |
Measurment(L*W*H)(mm) |
1860*622*1275 |
2110*780*1350 |
2150*1100*1350 |
Spiral axes rotate(r/min) |
32-40 |
37-45 |
37-45 |
Note:
The series YZYX120 spiral oil press produced by our company is suitable for squeezing vegetable oil from rapeseed, cottonseed, soybean, shelled peanut, flax seed, tung oil seed, sunflower seed and palm kernel, etc. The product has characteristics of small investment, high capacity, strong compatibility and high efficiency. It is widely used in small oil refinery and rural enterprise.
YZYX120 is the basic 2-step-squeezing spiral oil press. YZYX120-8 is 3-step-squeezing spiral oil press, which has larger press chest cavity, suitable for the users who have operating experience and stress on the oil content of dry cakes. YZYX120-9 is 4-step-squeezing spiral oil press with lengthened press chest.
The model YZYX120J is a 4 step squeezing spiral oil press. The squeezing force is bigger; the oil plants can be squeezed in the chamber for a longer time. In the meanwhile, without increasing the electric power, the day capacity is bigger, the oil yield efficiency is higher, the oil rate in the cake is lower (5.5% is the best value). This series of machine save energy consumption, save land source and energy, increase social benefit, meet the market demand and have a big market.
The model YZYX120SL is new 4-step squeezing oil press machine, with water cooling system to prevent the temperature in the squeeze chamber going too high, preserve the nutrition substances in the oil. The processing capcity and oil yield is higher without increasing power consumption. The press chamber’ force can be maintained stable (between 120℃ to 140℃ according to different oil plants’ requests), avoiding the protein change too much than needed and the oil plants get burnt as the temperature getting too high after long term and continuous squeezing. Consequently, the oil yield efficiency can be increased and the vitamin, fat acids, mineral and other nutrients get lost. At the same time, it increases the value of the cake, automation. The structure is compact, the operation and maintenance is easy. This model has obtained national patent (patent number ZL.7).
Main Features of YZYX120 Screw Oil Press
It’s an integrated screw oil pressand below features are based on oil plants above the average quality smoothly and continuously squeezed after such pretreatments as screening, husking, flaking and cooking, etc.
Plants |
Processing Capacity |
Oil content ofDry cakes (%) |
Oil Yield Efficiency (t/24h) |
Electricity Consumption (kw.h/t) |
Rapeseed |
≥6.5 |
≤7.4 |
≥84 |
≤34 |
Cotton seeds |
≥6.5 |
≤6.3 |
≥80 |
≤54 |
Soybean |
≥5.5 |
≤6.2 |
≥69 |
≤51 |
Peanut |
≥6.5 |
≤6.3 |
≤92.5 |
≤34 |
Note:
① It is normal that sometimes the actual results may be a little different from those in the index because the oil plant’s type, quality and original content may be different in different areas.
② The day capacity (t/24h) is based on using hot way to squeeze one time. The more the squeeze times are, the lower the date capacity is.
The sufficiently high temperature in the press chest is significant for the output and the oil yield efficiency. Normal pressure can’t be formed for the oil plants, cake can’t be formed and the oil yield efficiency will be affected when it is too high or too low. In order to make the squeeze chamber have the best temperature, shorten the preparation time, there are two electric heating tubes with 0.75k between the top and bottom press cage. In the meanwhile, to avoid the temperature of the press chamber getting too high, the machine is added with water cooling system, when the button switch is in automatic model, the oil press starts to warm up the press chamber by squeezing cake, in the meantime, the two electric tubes started to heat the press chamber, when the heating indication light is on. When the temperature reaches the regulated degree, the heating indication light will be off.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
Mustard Oil Press Machine | Mustard seed is still rare in the oil crop which can be used in the oil expeller in China and the plant area is not so large. Mustard seed is the s... | |
Cold Oil Press Machine | Cold pressing is to press the oil directly in the oil press without heating after the oil is screened and cleaned. It is difficult to press the oi... | |
The automatic temperature controlled integration oil pressis built up with electricity controlling part, electric frying part, and auto heating &am... | ||
YZYX120 Screw Oil Press | YZYX120 series are commonly use for oil processing workshop, which also suit for oil mill factory. It has the low oil content of the dry cakes afte... | |
Walnut Oil Press Machine | Introduction to the walnut oil extraction machine Walnut oil extraction machine presses the walnut with a screw oil press. walnut oil press equipm... |
Похожие товары
Bottle cap mold | Продавец: Taizhou Huangyan Yongsheng Mould Co., Ltd. | Taizhou Yongsheng Mould Co., Ltd. can produce cap moulds ()within 64 cavities. The hot runner or ... | |
4800030000 For daewoo,evobus,mercedes-benz,paccar foot brake valve | Продавец: Zhuji Oubote Auto Parts Co., Ltd. | 4800030000 foot brake valve are attached to the brake pedal. This isthe valve that actually start... | |
emergency tire chains | Продавец: Zhejiang Pujiang Bohu Chain Stock Co., Ltd. | Winter weather can be treacherous for commercial fleets, but with the right equipment, you can ke... | |
Plastic Injection Mould For 2009 Audi A5 Front Bumper | Продавец: Taizhou Huangyan Chenpeng Mould Co., Ltd. | Our Advantage:1.We have developed about 1000 PCS bumper mould since we founded.2.Our company's mo... | |
AUTO Self-Priming Pump | Продавец: Zhejiang Huaqi Information Technology Co., LTD | Automatic Priming: Our self-priming pump is equipped with an automatic priming system that elimin... |