XK Spherical roller bearings ( self aligning bearings)
Spherical roller bearings have two rows of rollers, a common sphered outer ring raceway and two inner ring raceways inclined at an angle to the bearing axis The centre point of the sphere in the outer ring raceway is at the bearing axis. Therefore, the bearings are self-aligning and insensitive to misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection. Spherical roller bearings are designed to accommodate heavy radial loads, as well as heavy axial loads in both directions.
Bearing performance is not only determined by load or speed ratings. There are a number of other factors that contribute to bearing performance. To a large extent, performance is influenced by the geometry of the rollers, raceways and cages, the heat treatment, as well as the surface finish of all contact surfaces. Main factors which influence SKF spherical roller bearing performance include, but are not limited to:
Symmetrical rollers
Symmetrical rollers self-adjust, providing optimal load distribution along the roller length. This keeps stresses low under all load conditions and extends bearing service life.
Roller tolerances
The rollers in an XK spherical roller bearing are manufactured to extremely tight tolerances for dimension and form. Each roller is virtually identical in size and shape to the other rollers in the set. This optimizes load distribution over the rollers to maximize bearing service life.
Special roller profile
The roller profile determines the stress distribution in the roller/raceway contact area. The special profile distributes loads more evenly along the rollers and prevents stress peaks at the roller ends to extend bearing service life
Self-guiding rollers and a floating guide ring between the two rows of rollers
Self-guiding rollers reduce friction and frictional heat . A floating guide ring guides unloaded rollers so that they enter the load zone in the optimal position.
Metal cages
All XK spherical roller bearings contain strong metal cages. This enables them to tolerate high temperatures and all lubricants.
Другие товары поставщика
|
|
Cooper split roller bearings for mining equipment |
Split bearing is not in the demolition of other parts of the shaft, can quickly and easily install the bearing, can shorten the maintenance cycle m... |
|
|
XK KR series curve wheel track roller bearing |
Curved roller bearings can withstand heavier radial loads, and since the outer ring is axially guided by the rollers, the bearings can also withsta... |
|
|
RNA22 series Supporting track roller bearing |
RNA22 ... 2RS, NA22 ... 2RS type support roller RNA22..2RS for the outer double-wall, a cage, curved roller roller bearings. The diameter of this r... |
|
|
KRV series curved Bolt roller bearing |
Curved roller bearings can withstand heavier radial loads, and since the outer ring is axially guided by the rollers, the bearings can also withsta... |
|
|
NATR series Supporting track roller bearing |
NATR and NATR ... PP type support roller NATR series of support rollers include outer ring, inner ring, needle roller cage assembly and pressed int... |
Все товары поставщика
Похожие товары
