Tobee® 8/6E-AHR Rubber lining pump Frame Plate Liner F6036R55
Tobee® 8/6E-AHR Rubber lined slurry pumps wet end parts,Cover Plate Liner F6018R55, Impeller F6147R55,Frame Plate Liner F6036R55, Throat Bush F6083R55. EAM005 Bearing assembly is an important wear parts for 6inch pumps as well.
Tobee®Rubber Slurry Pump Spare Partsare mainly pump wetted parts and directly contact with slurries, They are very crucial to the service life of slurry pumps. The wetted parts include impeller, liners, throat bush, frame plate liner insert, casing etc. The rubber slurry pump parts are more suitable for delivering strong corrosive or abrasive slurries of small particle size without sharp edges.
Tobee®Rubber Slurry Pump Main parts:
• Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
• Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer seal rings back all liner joints.
• Casing - Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
• Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
• Throat bush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
HEBEI TOBEE PUMP CO.,LIMITED
Email:
| |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Tobee® 18x16TU-AH Slurry Pump | Tobee® 18x16TU-AH Slurry Pumpis perfect for difficult mill duties with long wear life, It is most complete range of centrifugal slurry pumps fo... |
 |
Tobee®Mission 2500 Supreme Pump | Tobee® Mission 2500 Supreme Centrifugal Pumphas a semi-open impeller design that contains wide-tipped vanes and a more tangential circumference... |
 |
Tobee® 10x8E-M Medium Duty Slurry Pump | Tobee® 10x8E-M Medium Duty Slurry Pumpis cantilevered, horizontal and centrifugal with double casing structure, It mainly suitable for pumping ... |
 |
Tobee® 3/2C-AHR Rubber Slurry Pump | Tobee® 3/2C-AH Rubber Lined Slurry Pumpis designed for the continuous pumping of high abrasive, high density slurries with minimal maintenance ... |
 |
Tobee® 14x12 inch Slurry Pump Parts Bearing Assembly SH005M | Tobee®Slurry Pump Bearing Assembly SH005Mis also called rotor assembly which an important driven part of the 14x12 ST-AH Slurry Pumps. TheBeari... |
Похожие товары
 |
WN(Q) Dredging Pump | Продавец: Shijiazhuang Chongmu Fluid Machine Co., Ltd | The dredging pumpis a kind of mud pump developed by our company, which is used for dredging and h... |
 |
IH Stainless Steel Centrifugal Pump | Продавец: Shijiazhuang Chongmu Fluid Machine Co., Ltd | The IH type single-stage single-suction cantilever chemical centrifugal pump is an energy-saving ... |
 |
Horizontal Multistage Pump | Продавец: Shijiazhuang Chongmu Fluid Machine Co., Ltd | Looking for a reliable horizontal multistage pump manufacturerwith high-quality, durable, and exp... |
 |
Diaphragm Pump DP03BL Series | Продавец: Integared Screw Compressor PMSM Motor | Diaphragm Pump DP03BL Series We specifically manufacture DP03BL diaphragm pump for use in medica... |
 |
Gr300 Pneumatic Conveying Equipment/Air Vacuum Powder Automatic Conveying Equipment | Продавец: Greentech International (Zhangqiu) Co., Ltd | Cast Iron Blow Through Airlock Valve Positive Rotary FeederRotary airlocks displace bulk solids f... |
