Tungsten carbide valve gate FAQ FOR CLIENTS

• 

Stainless steel valve gates

Valve Gate: The core parts of flat gate valves used in the petrochemical industry require high pressure, wear resistance, corrosion prevention against H2S and CO2, especially wellhead and Christmas tree valves have higher requirements.

PRODUCT PARAMETERS

Valve Gate: The core parts of flat gate valves used in the petrochemical industry require high pressure, wear resistance, corrosion prevention against H2S and CO2, especially wellhead and Christmas tree valves have higher requirements. Our company selects thermal spraying technologywhich using high-quality thermal spraying powder as raw material, adopts supersonic spraying equipment, optimizes thermal spraying process, and supports advanced processing equipment and technology, so that the denseness of coating can meet the gas sealing requirements under up to 140 MPa, the coating porosity <1%, the bonding strength exceeds 75MPa, the hardness reaches HV1500 and the hardness uniformity fluctuates by no more than HV100; the product surface after coating can reach mirror surface, with roughness less than Ra0.1, and flatness no more than 2 bands, which can effectively reduce the coefficient of friction between Valve Gate and valve seat and improve its service life.

Другие товары поставщика

	valve Seat And Thermal Spraying	Valve Seat: The detachable surface parts in valve are used to support the valve spool in the fully closed position and constitute a sealed part. Ge...
	GATE VALVE SEAT	GATE VALVE SEAT valve seat Valve Seat: The detachable surface parts in valve are used to support the valve spool in the fully closed position and c...
	INTRODUCTION TO HVOF Coating	INTRODUCTION TO HVOF Coating custom valve gates Valve Gate: The core parts of flat gate valves used in the petrochemical industry require high pres...
	Common Gate Valve Coating Materiails	Common Gate Valve CoatingMateriails Valve Gate PRODUCT PARAMETERS FOR GATE OF GATE VALVE COATING This part can be illustrated by a table shown belo...
	GATES OF GATE VALVE	GATES OF GATE VALVE Valve Gate Valve Gate: The core parts of flat gate valves used in the petrochemical industry require high pressure, wear resist...

Похожие товары

	Class 300 Valve	Продавец: GangYe Group Co.,Ltd.	Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing...
	Class 3000 Industrial Valve	Продавец: GangYe Group Co.,Ltd.	Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-...
	Class 2500 Industrial Valve	Продавец: GangYe Group Co.,Ltd.	Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ...
	Class 150 Valve	Продавец: GangYe Group Co.,Ltd.	globe valve class 150is a pressure rating designation defined by standards organizations, such as...
	Class 1500 Industrial Valve	Продавец: GangYe Group Co.,Ltd.	A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at ...