Introduction to Hvof Tungsten Carbide Coating

• 

Introduction to Hvof Tungsten Carbide Coating

HVOF COATING

Cemented Carbide Valve Seat

Valve Seat: The detachable surface parts in valve are used to support the valve spool in the fully closed position and constitute a sealed part. Generally, valve seat diameter is the maximum flow diameter of the valve.

PRODUCT PARAMETERS FOR HVOF COATING

Brief Introduction

High-velocity oxygen-fuel is a new thermal spray technologyinvented by Browing in the United States in 1981. Nowadays, it is generally called HVOF (High-velocity oxygen-fuel). The flame generated by this technology is a high-temperature, high-speed combustion flame flow generated by using a hydrocarbon-based gas or hydrogen such as propane or propylene, and high-pressure oxygen in a combustion chamber or in a special nozzle. The velocity of the combustion flame can reach more than five Mach (1500 m/s). The axial direction of the powder is fed into the flame, and the sprayed particles can be heated to a molten or semi-molten state. Accelerate the velocity of the combustion flame to a speed of up to 300-500 m/s or even higher, resulting in a high-density, dense, high-quality coating.

The HVOF has a high speed, but the temperature is relatively low, about 300 ° C. For the spraying of WC-Co cemented carbide, the decomposition of WC during spraying can be effectively suppressed. The coating not only has high bonding strength, but also has excellent compactness and abrasive resistance. The abrasive resistance of the coating greatly exceeds that of the plasma sprayed layer, which is equivalent to the explosive sprayed layer and exceeds the hard chrome layer and the sprayed layer. The range of applications is extremely wide.

Другие товары поставщика

	Tungsten carbide valve gate FAQ FOR CLIENTS	Stainless steel valve gates Valve Gate: The core parts of flat gate valves used in the petrochemical industry require high pressure, wear resistanc...
	INTRODUCTION TO HVOF Coating	INTRODUCTION TO HVOF Coating custom valve gates Valve Gate: The core parts of flat gate valves used in the petrochemical industry require high pres...
	Tungsten Carbide Valve Seats FAQ FOR CLIENTS	Tungsten Carbide Valve SeatsFAQ FOR CLIENTS Custom Valve Seats Valve Seat: The detachable surface parts in valve are used to support the valve spoo...
	TUNGSTEN CARBIDEN VALVE SEAT	TUNGSTEN CARBIDEN VALVE SEAT Stainless steel Valve Seats Valve Seat: The detachable surface parts in valve are used to support the valve spool in t...
	HIGH PERFORMANCE VALVE GATE DISPLAY	HIGH PERFORMANCE VALVE GATEDISPLAY Wear Resistance Valve Gate Valve Gate: The core parts of flat gate valves used in the petrochemical industry req...

Похожие товары

	Class 300 Valve	Продавец: GangYe Group Co.,Ltd.	Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing...
	Class 3000 Industrial Valve	Продавец: GangYe Group Co.,Ltd.	Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-...
	Class 2500 Industrial Valve	Продавец: GangYe Group Co.,Ltd.	Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ...
	Class 150 Valve	Продавец: GangYe Group Co.,Ltd.	globe valve class 150is a pressure rating designation defined by standards organizations, such as...
	Class 1500 Industrial Valve	Продавец: GangYe Group Co.,Ltd.	A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at ...