Backflow Preventers
Basic informationThis sustainingvalveis opened to prevent the pipeline and equipment from being damaged due to overpressure when the pressure in the water supply pipeline exceeds the set pressure of pressure relief. The valve closes automatically when pressure drops to the set value.Features1. Accurate Pressure Control2. Fast Opening to Maintain Line Pressure3. Slow Closing to Prevents Surges4. Completely Automatic OperationPrincipleInlet pressure water enters the lower cavity of the pilot valve diaphragm from the guide valve when the pressure in the pipeline exceeds the set pressure of the guide valve to make its pressure increase to open the guide valve, the main valve control room outwards drain under the effect of the inlet pressure water to open the main valve, it starts to discharge pressure. When the pressure in the pipeline drops to the set pressure, the pressure in the lower cavity of the guide valve diaphragm decreases, causing the guide valve closed. This results in increased water pressure from the guide pipe to the pilot valve, then to the main valve control room. The main valve plate closes and begins to hold pressure.Installation and CommissioningThe pressure relief(sustaining) valve supports horizontal and vertical installation but should pay attention to the inlet and outlet direction of valve body water when installing. In general, one fire water supply system can only install one pressure relief valve. Within the operating pressure range of the spring specified in the nameplate, the opening pressure can be adjusted by rotating the adjusting screw to change the spring compression amount. For specific use, please consult ZECO Valve Group.Product Scope, Standards & MaterialsSize Range: 2"~24"Pressure Rating: 10bar ~ 25barFace to Face Dimensions: AMSE B16.10, EN558-1Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2Coating: Fusion Bonded Epoxy CoatingInspection and Test: ISO 5208 / EN 12226-2
ZECOis one of the most professional control valve manufacturers china, and we have been devoted to produce valve chinafor many years. If you want to know more details or want a quotation, just feel free to contact us!
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Flange Globe Valve | Description of Flange Globe Valve: ZECO flange globe valve can be divided according to the location of the stem thread. Flange globe valve stem thr... |
 |
Characteristic of Trunnion Mounted Ball Valve Construction Machinery | Although there are many types of trunnion mounted ball valvesproducedby trunnion ball valve supplier, they all have the following ball valve charac... |
 |
Lug Butterfly Valve | Features of Lug Butterfly Valve Low opening torque, Radial dynamic balance sealing system is adopted, so that the forces on both sides of the inle... |
 |
Dirt Separator | Basic informationThis valve is used for water purification.Features1. Easy to operate;2. No water stop is required to clean the cavity body;3. Dirt... |
 |
12 Inch Butterfly Valve | Description of 12 Inch ButterflyValve:Most of ZECO 12 inch butterfly valves operated by hand-wheel, wrench and handles, pay attention to the operat... |
Похожие товары
 |
Class 300 Valve | Продавец: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... |
 |
Class 3000 Industrial Valve | Продавец: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... |
 |
Class 2500 Industrial Valve | Продавец: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... |
 |
Class 150 Valve | Продавец: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |
 |
Class 1500 Industrial Valve | Продавец: GangYe Group Co.,Ltd. | A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at ... |
