Pressure Relief(Sustaining) Valve
Basic informationThis sustaining valveis opened to prevent the pipeline and equipment from being damaged due to overpressure when the pressure in the water supply pipeline exceeds the set pressure of pressure relief. The valve closes automatically when pressure drops to the set value.Features1. Accurate Pressure Control2. Fast Opening to Maintain Line Pressure3. Slow Closing to Prevents Surges4. Completely Automatic OperationPrincipleInlet pressure water enters the lower cavity of the pilot valve diaphragm from the guide valve when the pressure in the pipeline exceeds the set pressure of the guide valve to make its pressure increase to open the guide valve, the main valve control room outwards drain under the effect of the inlet pressure water to open the main valve, it starts to discharge pressure. When the pressure in the pipeline drops to the set pressure, the pressure in the lower cavity of the guide valve diaphragm decreases, causing the guide valve closed. This results in increased water pressure from the guide pipe to the pilot valve, then to the main valve control room. The main valve plate closes and begins to hold pressure.Installation and CommissioningThe pressure relief(sustaining) valve supports horizontal and vertical installation but should pay attention to the inlet and outlet direction of valve body water when installing. In general, one fire water supply system can only install one pressure relief valve. Within the operating pressure range of the spring specified in the nameplate, the opening pressure can be adjusted by rotating the adjusting screw to change the spring compression amount. For specific use, please consult ZECO Valve Group.Product Scope, Standards & MaterialsSize Range: 2"~24"Pressure Rating: 10bar ~ 25barFace to Face Dimensions: AMSE B16.10, EN558-1Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2Coating: Fusion Bonded Epoxy CoatingInspection and Test: ISO 5208 / EN 12226-2
Zheng fengis one of the most professional water gate valve manufacturers and we have been devoted to produce China control valvefor many years. If you want to know more details or want a quotation, just feel free to contact us!
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Resilient Gate Valve for Underground | Basic informationThis underground gate valveis used as a two-way closed circuit device.Features1. No need for sluice Wells, which reduces the amoun... |
 |
High Pressure Shut-off Valve | Basic information of High Pressure Shut-off Valve This valve is closed after the fire pump is started to cut off the domestic water and ensure the ... |
 |
Electric Ball Valve | Description of Electric Ball Valve: ZECOelectrically operated valveis named after the combination of electric actuator and ball valve. It is usual... |
 |
Single Orifice Air Release Valve | Features of single orifice air release valve Can be a large amount of exhaust, improve water efficiency pump Can be a small amount of exhaust... |
 |
Forged Steel Valve | Forged Valve ZECO forged valve refers to the blank of valve, which is a forging piece with certain mechanical properties, shape and size produced b... |
Похожие товары
 |
Class 300 Valve | Продавец: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... |
 |
Class 3000 Industrial Valve | Продавец: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... |
 |
Class 2500 Industrial Valve | Продавец: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... |
 |
Class 150 Valve | Продавец: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |
 |
Class 1500 Industrial Valve | Продавец: GangYe Group Co.,Ltd. | A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at ... |
