Anti Water Hammer Valve

• 
• 
• 

ZECO is one of the leading check valve manufacturers china, China. ZECO check valveprovides non-slam closure, have a low head loss and close drip-tight. In applications where return flow protection is desired, ZECO's Check valves provide superior and leak-free performance.

Basic Information of Anti Water Hammer Valve

This anti hammer water control valveis used to reduce the pressure fluctuation caused by the sharp change in the flow rate when the pump is closed or stopped due to power failure, thus protecting the water pump system.

Features of Anti Water Hammer Valve

1. anti water hammer check valvecan sense low-pressure waves and high-pressure waves.2. Sensitive induction, quick control3. Fast Opening to Maintain Line Pressure4. Full port, small fluid resistance

Principle of Anti Water Hammer Valve

Generally, the sudden stop of the pump will produce huge pressure fluctuations, the pressure in the sampling tube will also fluctuate at this time. The low-pressure pilot valve senses this initial pressure wave to open the drain so that the main valve opens to prevent high-pressure fluctuations from returning from the system. The opened main valve drains high-pressure waves into the atmosphere. The high-pressure pilot valve induces high-pressure waves which also open and keeps the main valve open. When the system pressure is lower than the preset pressure of the pilot valve, the high-pressure pilot valve is closed, the pressure of the main valve control room is increased, and the main valve is closed to maintain the system pressure in the pilot valve preset pressure.

Installation and Commissioning of Anti Water Hammer Valve

Determine the high and low-pressure settings, and adjust the pipeline pressure at low-pressure settings. At this point, the low-pressure pilot valve is set at the critical state of opening and closing and locking the nut. Adjust the pipeline pressure to the high pressure setting value, set the high-pressure pilot valve to the critical state of opening and closing to lock the nut. For specific use, please consult ZECO Valve Group.

Product scope, Standards & Materials of Anti Water Hammer Valve

Size Range: 2"~24"Pressure Rating: 10bar ~ 25barFace to Face Dimensions: AMSE B16.10, EN558-1Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2Coating: Fusion Bonded Epoxy Coating Inspection and Test: ISO 5208 / EN 12226-2

Другие товары поставщика

	4 Inch Gate Valve	Description of 4 Inch Gate Valve: ZECO 4 flanged gate valveis one of the most commonly used calibers. Gate valve in the line just switch effect, lo...
	Electric Ball Valve	Description of Electric Ball Valve:ZECOelectric ball valveis named after the combination of electric actuator and ball valve. It is usually used in...
	Anti Water Hammer Valve	ZECO is one of the leading check valve manufacturers china, China. ZECO check valveprovides non-slam closure, have a low head loss and close drip-t...
	Gate Valve	Gate Valve ZECO is one of the professional gate valve manufacturing companies, specializing in the production of wedge gate valve and through cond...
	Backflow Preventers	The problem of contaminated water due to backflow is emerging, and the health hazards caused by contaminated water are also alarming to engineers a...

Похожие товары

	Check Valve, 600 LB, 1/2 Inch, Piston type, Bolted Cap	Продавец: China Valmax Valve Co., Ltd.	China Check Valve manufacturer Valmax supplies Check Valves with the body, bonnet, disc, and se...
	Check Valve, 900 LB, 1/2 Inch, RF, Pressure Seal Cap	Продавец: China Valmax Valve Co., Ltd.	China Check Valve manufacturer Valmax supplies Check Valves with the body, bonnet, disc, and se...
	Check Valve, 600 LB, 1/2 Inch, Piston type, Bolted Cap	Продавец: China Valmax Valve Co., Ltd.	China Check Valve manufacturer Valmax supplies high-quality Check Valves, with the body, bonnet...
	Combination angle valve	Продавец: Zhejiang Huaqi Information Technology Co., LTD	Meet our Brass Angle Ball Valve, a versatile and reliable solution for controlling fluid flow in ...
	Multifunctional hydraulic control valve	Продавец: FLUID TECH PIPING SYSTEMS (TIANJIN) CO.,LTD	Features: Size: 2"-24”(DN50-DN600) Material: Ductile iron ASTM A536, 65-45-12 Dimension:...