LOOSE FLANGE

MstnLand's series of loose flange is usually produced with the size ranging between DN15‐DN600. Loose flange is a two-piece component. The first piece is known as a stub end and the second piece is referred to as a backing flange. As for the stub end, which is a sleeve and is shaped similar to a short piece of pipe. This flange has a narrow shoulder on one end, with the other end or the hub that has been butt welded. The dimensions of the narrow shoulder are like the raised face of the flange, whereas the butt weld end of the stub-end is similar to the neck of a weld neck flange, down to the diameter and thickness. The back face of the hub of the loose flangeis produced 0with a rounded transition that attaches the hub to the sleeve.

Body material:	Carbon Steel, Alloy Steel, Stainless Steel
Size range:	DN15～600
Pressure rating:	CLASS 150lb～2500lb
Sealing surface	FF
Applicable medium:	Water, Steam≤1.0MPa, Oil&Gas
Applicable industry:	Pipelines with large fluctuations in temperature or pressure or pipelines with high temperature, high pressure and low temperature and also used to transport expensive media, flammable and explosive media and toxic gases.
Design & Manufacture:	API, ASME, ASTM, ANSI, BS, EN, DIN, JIS, ISO, SANS, GOST, GB.

Loose flange vs Slip-on flange

Advantages of loose flanges:

In a corrosive situation, the flange joints need to be exchange very soon. To a loose flange, only the stub end is touch with the pipe and fluid, the backing flange no need to touch it. It means you could only replace the stub end , no need to replace the backing flange, so the loose flange can decrease the cost of the piping systems. The backing flange and the stub end is seperated, so we can use two different materials for the two pieces. It can work for more complicated application.

Advantages of slip on flanges:

Less time needed to spent on ensuring the accuracy of the cut pipe.

They prevent leakage.

Loose flange can help

Due to the nature of pipelines, the connections and couplings can rarely be constructed in advance. The use of loose flanges allows workers to create a joint at any feasible location along the pipe.The worker simply cuts the pipe at the required location and places a loose flange at the end of the pipe. After carefully preparing the pipe for welding, permanently weld the loose flange to the pipe end. If a valve or elbow is required, the worker simply welds the flange to the elbow or valve and the pipe and the joint is made.

In many cases, pipes are welded together using straight pipe sections and loose flanges to form a complete pipe line. Whether hand welded or machine welded, pipes are assembled from straight cut ends of pipes that are welded together to form a nearly seamless pipe, with flanged joints installed at key points in the pipe. In these locations, loose flanges are welded to the pipe on both sides of the fitting, and the pipes are bolted together using washers and a number of hardened bolts.

If you are looking for professional check valve manufacturers, please contact us, and we will be your best partner.

Другие товары поставщика

	PIPELINE FILTERS	Y-type Internal Thread Cast Iron Pipeline Filter Y-type Flanged Cast Iron pipe filter pattern Y-type Cast Steel Pipeline Filter Y-type Stainle...
	CHECK VALVES	As one of the butterfly check valve manufacturers, MstnLand provides high performance butterfly check, including Swing check valve, Lifting check v...
	RISING STEM VS NON RISING STEM GATE VALVE	RISING STEM VS NON RISING STEM GATE VALVE We all know that a gate valve needs to be installed to build a building, but the gate valve has two types...
	CAST IRON GATE VALVES	CAST IRON GATE VALVES MstnLand, as one ofprofessional cast iron gate valves suppliers, provides high performance gate valve products, mainly inc...
	CAST IRON FILTER	Cast iron filteris an indispensable device on the pipeline of conveying medium. It is usually installed at the inlet end of pressure reducing valve...

Все товары поставщика

Похожие товары

	Male Thread Nickel Plated Brass Butterfly Ball Valve	Продавец: Zhejiang Huibo Valve Technology Co., Ltd.	Male Thread Nickel Plated Brass Butterfly Ball Valve Material: Brass Body, Brass Bonnet, brass ba...
	4800030000 For daewoo,evobus,mercedes-benz,paccar foot brake valve	Продавец: Zhuji Oubote Auto Parts Co., Ltd.	4800030000 foot brake valve are attached to the brake pedal. This isthe valve that actually start...
	Aluminum Gas Valve	Продавец: Dong Guan ABYDA Gas Valve Co., Ltd	Product Specification:1. Raw Material: Al Alloy + solid brass + Mild steel;2. Applicable for LPG,...
	Yoyik supply Fan slider S4GA8814 for turbine generator	Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	Yoyik supply Fan slider S4GA8814 for turbine generator Is a major production of Dongfang Yoyik. D...
	API 6A FC Slab Gate Valve	Продавец: China JSC Valve Manufacturer Group Co., Ltd.	FC gate valve adopts a non-rising stem, slab gate, full-size conduit design, floating slab gate a...