RISING STEM VS NON RISING STEM GATE VALVE

• 

RISING STEM VS NON RISING STEMGATE VALVE

We all know that a gate valve needs to be installed to build a building, but the gate valve has two types of open rods and dark rods, and many users do not understand the situation. What is the difference between a rising stem gate valve and a non rising stem valve? Let's take a look together.

1. Rising stem and non rising stemgate valve advantages

Rising stem valve features

Gate valves are usually designated as rising-stem and non rising stemdesigns, so it's important to learn about the features and advantages of rising and non rising gate valve. The advantage of rising-stem valves is that they permit easy visualization as to whether a valve is open or closed. The advantage of the Non-Rising Stem, or NRS valves, is that the stem is protected from exposure to corrosive or other environmental conditions by the valve bonnet. Neither design has much impact on the actual valve function. Rising stem gate valves are usually made from cast or forged steel while non rising stem gate valves are more typically brass, bronze or cast iron. MSTNLAND China stem gate valve can has many applications. Non rising stem valve, however, take up less space and rising stem valves require more space. In the rising stem gate valve, the round handle rotates a threaded shaft which is attached to its center. Turning the handle will cause the stem to rise as it opens the valve and descend as it closes the valve. How to tell if a gate valve is open or closed? If it's a rising valveit is easy to tell by looking at the amount of stem that is exposed. If the handle is flush with the pipe (no exposed stem), the valve is closed. If a lot of stem is exposed, the valve is open.

Non rising stem valve features

This simple system has a couple of disadvantages which can be avoided compared with another type of gate valve: the non rising stem gate valve. As for the non rising stem gate valve, it is usually suitable for tight places where there is not enough room for the stem to raise, for example, places with underground pipes. The non rising stem gate valve is fully open when the handle is rotated as far as possible to the left and fully closed when the handle is rotated as far as possible to the right. In both cases the handle is flush with the pipe because the mechanism inside the pipe opens and closes the valve without raising the stem. Another advantage to the non-rising stem gate valve is that it is easier to padlock. With the rising stem gate valve, two different size padlocks could be needed to lock the valve open and closed. With the non rising gate valveone padlock is enough. But the disadvantage of a non rising stem gate valve is the fact that the screw threads that lift the gate are exposed to the fluid being controlled by the valve. This can cause problems if the fluid tends to foul the threads, so non rising stem valves are usually only used on clean liquids and gases. Therefore, these two kinds of valves have their own advantages and can be purchased according to actual needs. A group of potential valve manufacturers producing high-quality China stem gate valve have been spawned by the huge China valve market. MstnLand is one of them. As a professional non rising stem gate valve manufacturers, MstnLand aims to provide all customers with high quality non rising stem valve.

2. difference between rising and non rising stem gate valve

Different shapes

The stem of the open industrial gate valve is directly exposed and can be seen directly, while the stem of the dark stem gatevalve is set inside the valve body and cannot be seen directly. If you want to check the valve stem, you need to first Open the valve body.

Different switching principles

The valve stem of the open stem gate valve is driven up and down through the valve stem and the steering wheel thread, while the valve stem and the steering wheel of the dark stem gate valve are relatively stationary, so when switching up and down, it can be directly rotated at a fixed point. , to realize the drive gate valve.

Different methods of lifting the gate

The stem of the rising stemgate valve is exposed, the nut is fixed on the handwheel, and the gate is lifted by rotating the screw. At this time, the screw and the gate are in relative rotational motion, and the surface of the gate valve can be seen. to the door type bracket. The nut of the dark stem gate valve is fixed on the gate, and the rotation of the screw itself is used to complete the action of lifting the gate, so from the appearance, the door clip cannot be seen.

Conclusion

The above difference between the open stem gate valve and the dark stem gate valve is introduced here, I hope to help you. There are obvious differences between the open stem gate valve and the dark stem gate valve in terms of working principle and appearance, so when purchasing, you must fully understand it to avoid unnecessary influence.

MSTN, as an excellent valves factory, offers a wide range of din valvefor you to choose from.

Другие товары поставщика

	CAST STEEL BALL VALVES	API6D CAST STEEL FLOATING BALL VALVE MstnLand's series of cast steel ball valvesare suitable for opening and closing of water, steam and oil pipel...
	CAST IRON FILTER	CAST IRON FILTER Cast iron filteris an indispensable device on the pipeline of conveying medium. It is usually installed at the inlet end of press...
	REGULATING VALVES	REGULATING VALVES Hydraulic oil pressure regulatorare classified on the basis of their nominal capacity as medium-flow, small-flow, and microflow ...
	CAST IRON FILTER	Cast iron filteris an indispensable device on the pipeline of conveying medium. It is usually installed at the inlet end of pressure reducing valve...
	CAST STEEL BALL VALVES	API6D Cast Steel Floating Ball Valve Worm Gear Cast Steel Floating Ball Valve Pneumatic Cast Steel Floating Ball Valve Electric Cast Steel Float...

Похожие товары

	"High-reliability Support ring Y10-4 for power station	Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"High-reliability Support ring Y10-4 for power station Deyang YOYIK have power plant professional...
	"Wear Resistance dn50 globe valve WJ25-F1.6P for thermal power plant	Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"Wear Resistance dn50 globe valve WJ25-F1.6P for thermal power plant YOYIK professional productio...
	High-efficiency Superheater outlet plug valve SD61H-P61305V SA-182 F92 for power generation	Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"High-efficiency Superheater outlet plug valve SD61H-P61305V SA-182 F92 for power generation Deya...
	Automated Sealing gasket for corrugated pipe shut-off valve KHWJ25F3.2P for power station	Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"Automated Sealing gasket for corrugated pipe shut-off valve KHWJ25F3.2P for power station Is a m...
	Class 1500 LB gate valve	Продавец: China LiCB AC DC EV Charger Co., Ltd	Product Name: Low-EmissionPacking Setfor Class 1500 LB API 6D Gate ValveModel: M600Size: ID 68 mm...