ZMIO-D41 DIN3352 F4 Flanged Gate Valves
Din 3352 f4 gate valve is the production standard of the German-labeled valve, which includes metal sealing valves and soft sealing valves.
F4 is the structural length of the German-labeled valve, which is included in the DIN3202 standard, and the corresponding is F5. In contrast, the F4 structure length is shorter than F5.
ZMIO-D41 DIN3352 F4 Flanged Gate Valves Dimensions
DIN3352 F4 Flanged Gate Valves VS F5
1. Material:
Both body material of DIN3352 F4 flanged resilient seated gate valve and DIN3352 F5 flanged gate valve can cast iron and ductile iron, and both them can be metal seated and resilient seated.
2. Pressure:
Both DIN3352 F4 flanged gate valve and DIN3352 F5 flanged gate valve pressure can be PN10/16.
3. Range of Applications (Similarity and Difference):
Stardard:DIN 3352
Face to face:DIN 3202 F4/F5
Connection flange type:DIN2543,DIN2544,DIN2545，DIN2546
4. Installation (Similarity and Difference):
Checking the type of gate valve used F4/F5 before installation, consider that the face to face length should be consistent with the project design, all suitable for the DIN standard management system
ZMIO-D41 DIN3352 F4 Flanged Gate Valves FAQs
1. What is the Function for Valves?
The primary purpose of a valve is to direct and control the flow of fluids by starting, stopping, and throttling (restricting) flow to make processing possible.
2. Can Gate Valves Be Installed at End of Line?
Gate valves are not designed for end of line duty. We also recommend the use of a suitability-rated blanking flange for such applications.
Другие товары поставщика
|
|
Reducing Tee Varnish Paint Seamless Buttweld |
The butt weld reducing teeis also a kind of Tee, but the branch pipe and the main trunk line have an unequal pipe diameter. Reducing Tee is widely ... |
|
|
JIS Flange |
JIS flangesare flanges with Dimensions as per JIS Flange Standard, "JIS" Stands for Japanese Industrial Standard This kind of flange include lots o... |
|
|
Stub End Machined Buttweld |
Stainless steel stub end is a punching method for turning over the outer edge of the rough forgings or semi-finished product. the edge is turned in... |
|
|
Carbon Steel Buttweld Fittings |
Carbon steel buttweld fittingsare manufactured from seamless or welded mild steel pipes, through cutting into appropriate length, heating, forming,... |
|
|
Foot Valves |
Foot valve is used in a variety of applications, it is a simple product to use and install but are a key component to your pump, they make a big im... |
Все товары поставщика
Похожие товары
