soil nails are effective as temporary or permanent geostructural solutions

Designed to be installed horizontally or at a slight angle (20-25°), provide reinforcement for earth retention structures within excavations and on slopes in top-down construction. Installed into a drilled hole and used in combination with plate washers and shotcrete, soil nails are effective as temporary or permanent geostructural solutions.

Soil Nailing Applications

• Temporary and permanent excavation support/retaining walls
• Stabilization of tunnel portals
• Stabilization of slopes
• Repair of retaining walls

  Types of Facing

  The type of facing depends on application and soil type. Current facings include:
• Shotcrete, generally reinforced with either o Welded wire mesh o Rebar o Steel or polyester fibers
• Prefabricated concrete or steel panels

  Corrosion Protection

  Corrosion protection is necessary for long-term temporary and/or permanent works
• Epoxy Coatings
• Polyethylene Sheathing

  Soil Nailing Design Steps

  1. Perform geotechnical site investigation
  2. Evaluate excavation/nailed wall geometry
  3. Check wall stability - internal/external
  4. Incorporate drainage control system with nail wall design
  5. Finalize nailing layout and work sequence

  Suitable Application Media

  is possible in a wide range of materials including:
• Clays
• Sandy soils
• Weathered rock; tallus slope deposits
• Heterogeneous and stratified soils

  Soil nailing is not practical in:

• Soft, plastic clays
• Organics/Peat
• Loose (N less than 10), low density and/or saturated soils
• Fills (rubble, cinder, ash, etc.)

  Soil Nailing Drainage Systems

  Drainage systems are incorporated into the nailed wall, reducing liquid pressure and preventing saturation of the reinforced ground. Drainage systems include:
• Geotextile facing : Drilled in place relief wells
• Slotted plastic collection piping Surface drainage control above and behind the retaining wall is also critical to the system.

  Soil Nailing Quality Control

• Nailing installation sequence o Verification testing - pull test to verify design strengths o Progressive monitoring for design performance
• Conventional movement monitoring o Inclinometers o Optical survey of fixed targets o Shotcrete : Thickness, Strength

Другие товары поставщика

	Синьорок превратилась в международного поставщика ногтей грунта	Синьорок выросла из небольшой частный специалист Синьорок производит широкий спектр чрезвычайно надежной, точной и достоверной нагелей.Наш нагелей ...
	The advantages and application of soil nails	As an reliable and economical anchoring solution,soil nailshas been widely used in the mining,tunneling,foundation support,hydroelectric project an...
	Высокое качество лака для системы грунт для критических приложений - Синьорок	Синьорок-это ведущий производитель высококачественных ногтей почвенной системе встреча clients’ строгим требованиям для применения в агрессивных...
	Система грунтовых нагелей хорошо для тоннеля	В система грунтовых нагелей тела, и установить арматурную сетку на склоне, слоистый бетон,ведущих в почву гвозди, армирующая сетка, бетонная форма...
	Полный спектр ногтевого системе почва из Синьорок	Теперь синьорок производит и поставляет полный спектр система болт нержавеющий анкерный болт собственной личности сверля систему,ECT.Эти продукты д...

Похожие товары

	Hole Opener Bit	Продавец: Anbit mechanical and Electrical Equipment Co., Ltd.	Hole Opener Drill Bit The following pipe bit is mainly used to drive iron pipe to drill together ...
	Hand Hammer Drill	Продавец: Anbit mechanical and Electrical Equipment Co., Ltd.	The hand hammer drill machinehole diameter is 19 ~ 42mm, and the hole depth is up to 5m, usually ...
	Hammer	Продавец: Anbit mechanical and Electrical Equipment Co., Ltd.	ABT supplies a series of DTH hammers for sale. All DTH hammer drills features high energy-efficie...
	Eccentric Overburden Drilling Equipment	Продавец: Anbit mechanical and Electrical Equipment Co., Ltd.	Eccentric drillingis used for casing following drilling while drilling in soil layer. Product Des...
	Diamond Reaming Shell	Продавец: Anbit mechanical and Electrical Equipment Co., Ltd.	Specification Specification of Diamond Reaming Shell Category Bit Size (mm) PDC reaming s...