Solid CBN Inserts
Solid CBN Inserts
Solid Cbn Inserts Are Used For Rough And Finish Machining Of Hard Steel ,Cast Iron And Hard Surface Workpiece.
Details
Cubic Boron Nitride Inserts (CBN Inserts) Is A High-Performance Type Of Cutting Tool Material From A Polycrystalline Mass. CBN Is A High Hardness, High Heat Resistance Crystal Synthesized By Boron And Nitrogen Under High Temperature And High Pressure.
Applications Of Solid CBN Inserts:
Processing Workpiece: Rough And Finish Machining Of The Hard Steel ,Cast Iron And Hard Surface Workpiece.
Processing Materials: Ferrous Materials Possessing Hardness From Approximately 45 HRC As Well As Gray Cast Iron, Cr-Chilled Cast Iron And Wear Alloys On A Cobalt, Nickel Or Iron Basis.
Specification Of Solid CBN Inserts:
Insert Type |
Dimensions |
StandardCutting Edge |
|||
L | Ø I.C |
S | R | ||
RNMN060400 | 6.35 | 6.35 | 4.76 | 0 | T01020 T01025 T02020 T02030 S01020 S01025 S02020 S02030 S05020 S10020 |
RNMN090300 | 9.525 | 9.525 | 3.18 | ||
RNMN090400 | 9.525 | 9.525 | 4.76 | ||
RNMN120400 | 12.7 | 12.7 | 4.76 | ||
RNMN120600 | 12.7 | 12.7 | 6.35 | ||
RNMN120700 | 12.7 | 12.7 | 7.94 | ||
RNMN190700 | 19.05 | 19.05 | 7.94 | ||
RNMN201000 | 20 | 20 | 10 | ||
RNMN251000 | 25.4 | 25.4 | 10 | ||
RNMN251200 | 25.4 | 25.4 | 12 |
Inserts Type | Dimensions | Standard Cutting Edge | |||
L | Ø I.C | S | R | ||
SNMN090302 | 9 | 9.525 | 3.18 | 0.2 | S02020 S05020 S10020 |
SNMN090304 | 9 | 9.525 | 3.18 | 0.4 | |
SNMN090306 | 9 | 9.525 | 3.18 | 0.6 | |
SNMN090308 | 9 | 9.525 | 3.18 | 0.8 | |
SNMN090312 | 9 | 9.525 | 3.18 | 1.2 | |
SNMN090404 | 9 | 9.525 | 4.76 | 0.4 | |
SNMN090408 | 9 | 9.525 | 4.76 | 0.8 | |
SNMN090412 | 9 | 9.525 | 4.76 | 1.2 | |
SNMN120404 | 12 | 12.7 | 4.76 | 0.4 | |
SNMN120406 | 12 | 12.7 | 4.76 | 0.6 | |
SNMN120408 | 12 | 12.7 | 4.76 | 0.8 | |
SNMN120410 | 12 | 12.7 | 4.76 | 1.0 | |
SNMN120412 | 12 | 12.7 | 4.76 | 1.2 |
Inserts Type | Dimensions |
Standard Cutting Edge |
|||
L | Ø I.C | S | R | ||
TNGN110304 | 11 | 6.35 | 3.18 | 0.4 | S01020 S02020 |
TNGN110308 | 11 | 6.35 | 3.18 | 0.8 | |
TNGN110312 | 11 | 6.35 | 3.18 | 1.2 | |
TNGN160404 | 16 | 9.25 | 4.76 | 0.4 | |
TNGN160408 | 16 | 9.25 | 4.76 | 0.8 | |
TNGN160410 | 16 | 9.25 | 4.76 | 1.0 | |
TNGN160412 | 16 | 9.25 | 4.76 | 1.2 |
Inserts Type | Dimensions |
Standard Cutting Edge |
|||
L | Ø I.C | S | R | ||
CNMN090404 | 9 | 9.525 | 4.76 | 0.4 | S02020 |
CNMN090408 | 9 | 9.525 | 4.76 | 0.4 | |
CNMN090412 | 9 | 9.525 | 4.76 | 1.2 | |
CNMN120404 | 12 | 12.7 | 4.76 | 0.4 | |
CNMN120408 | 12 | 12.7 | 4.76 | 0.8 | |
CNMN120412 | 12 | 12.7 | 4.76 | 1.2 | |
CNMN120704 | 12 | 12.7 | 7.94 | 0.4 | |
CNMN120708 | 12 | 12.7 | 7.94 | 0.8 | |
CNMN120712 | 12 | 12.7 | 7.94 | 1.2 | |
CNMN120804 | 12 | 12.7 | 8.0 | 0.4 | |
CNMN120808 | 12 | 12.7 | 8.0 | 0.8 | |
CNMN120812 | 12 | 12.7 | 8.0 | 1.2 | |
CNMN160708 | 16 | 15.875 | 7.94 | 0.8 | |
CNMN160712 | 16 | 15.875 | 7.94 | 1.2 | |
CNMN160716 | 16 | 15.875 | 7.94 | 1.6 |
Inserts Type | Dimensions | Standard Cutting Edge | |||
L | Ø I.C | S | R | ||
RCMN060400 | 6 | 6.35 | 4.76 | 0.4 | S02020 S05020 S10020 |
RCMN090400 | 9 | 9.525 | 4.76 | 0.8 | |
RCMN090600 | 9 | 9.525 | 6.35 | 1.2 | |
RCMN120600 | 12 | 12.7 | 6.35 | 0.4 | |
RCMN120700 | 12 | 12.7 | 7.94 | 0.8 | |
RCMN150700 | 15 | 15.875 | 7.94 | 1.0 | |
RCMN190700 | 19 | 19.05 |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
cd Diamond Plate for Diamond Milling Cutter | Synthetic diamond single crystalare synthetic diamonds produced underhigh temperatureand high pressure(HTHP) conditions. We have a high quality ma... | |
cluster diamond dressing tools Norton diamond dressing tools | diamond dresser for grinding wheel diamond dressersare used for dressing specific forms into conventional abrasive grinding wheels require longer ... | |
Mono Crystal Diamond Tools For Ultra-Precision Processing | Mono Crystal Diamond Tools For Ultra-Precision Processing Themono-crystal diamond toolscan achieve excellent cutting edge by grinding. Andthe surfa... | |
pcd die blanks/cvd diamond/pcd draw,synthetic polycrystalline diamond | CVD Diamond Die Blanks CVD Diamond Die Blanks Can Be Used In Cold And Hot Wire Drawing Of Various Kinds Of Metal, Especially Tungsten, Forceps, Hi... | |
Diamond Honing Stone | Diamond Honing Stone Name:honingstone,abrasivestone,finishingstone Materials:AluminiumOxide,BlackSiliconCarbide,Green SiliconCarbi... |
Похожие товары
AF39M Purple Abrasive Film | Продавец: CHANGZHOU RMN ABRASIVES CO., LTD | AF39M Purple Abrasive Film RMC AF39M purple abrasive film discscan be used as Velcro and PSA dis... | |
Abrasive Film | Продавец: CHANGZHOU RMN ABRASIVES CO., LTD | RMC micro abrasive filmis polyester film backing, with a perfectly flat surface and high strength... | |
C35P Silicon Carbide Sanding Paper | Продавец: ZIBO SANKYO RIKAGAKU CO.,LTD | Wet & dry flexible latex, the inherent flexibility allows contour of irregular surface. Usual... | |
AP82 Aluminum Oxide Sand Paper Roll | Продавец: ZIBO SANKYO RIKAGAKU CO.,LTD | FUJISTAR Ewt velcro sanding rollAP82adopts the special backing paper with antistatic properties a... | |
AP57 Sanding Paper Roll | Продавец: ZIBO SANKYO RIKAGAKU CO.,LTD | FUJISTAR Ewt velcro backed sanding sheetsAP57 adopts the special antistatic backing paper and the... |