High hardness tungsten carbide guide wheel guide roller

• 
• 
• 
• 

1. For the rolling mill, guide rollers (also called ring rollers, guide wheel) is an indispensable part of wires export in the wires rolling process, it must be accorded with the requirements of high rigidity, good wear resistance (the service life is matched with the high-quality bearing), good thermal conductivity, a certain of red hardness, especially the high speed wires rolling (rolling speed is among 80-120m/s). In the current market, most of the guide wheels are manufactured by steel materials (especially in the domestic market), which have the weak wear resistance, short service life and high frequency replacement, so the scale benefit of wire materials is restricted. however, steel-bonded cemented carbide has the obvious strengths on this aspect.
   
   

   Lighter than Tungsten carbide roller by 55%, Lighter than tool steel than 20%, so the guide roller accelerates from standstill to 35,000 rpm, without damaging the bearing.Very low coefficient of friction and self-lubricating properties, so the working portion of the guide roller is less worn, and the production can be greatly increasedThe coefficient of thermal expansion is close to that of the bearing steel. When the quenching is hot, the bearing will not get stuck. The thermal expansion coefficients of titanium carbide cemented carbide and tungsten carbide hard alloy are very different from those of steel. Therefore, the steel bonded carbide guide roller is more advantageous for bearing anti-seize ability than the two cemented carbide guide rolls.The micro structure is titanium carbide and high chromium tool steel, which has good thermal fatigue resistance.Anti-oxidation, less magnetic, non-stick steel.Annealing hardness is only HRC45-48, easy to process, after quenching, only alittle fine grinding can be processed into finished products, the processing cost is low, so the price is also low. this is also one of the main reasons why titanium carbide guide rolls are superior to tungsten carbide guide rollers.Hardness HRC62-67, good wear resistance. the service life is 8-10 times that of high speed steel.Absolutely dense, the pores are almost zero, so it will not break when used and can be reused.Compared with similar foreign products, the price of Miller MT10 is lower, which greatly saves the production cost of customers.

Другие товары поставщика

	Stable and jitter-free titanium carbide guide wheel	Carbide titanium carbide guide wheel has a wide range of working temperature, -100 ℃ to 600 ℃ environment with stable performance, in the low-tem...
	Metal composite titanium carbide powder	After the surface of the powder is modified, it can be well combined with organic materials such as resin and plastic to form metal-ceramic composi...
	Surface finish Ra≤0.2μm Titanium carbide alloy bar	Titanium carbide alloy bar is an alloy bar with titanium carbide as the main component, combining high hardness, wear-resistant properties, good ...
	Titanium carbide hard rods - Impact resistance	The anti-adhesion performance of tungsten carbide round rods containing titanium carbide is excellent. When machining sticky materials such as alum...
	Wear-resistant titanium carbide rods - superior parts manufacturing	Titanium carbide round rods made of hard alloy have excellent electrical conductivity and can be used to make electrodes for electrical discharge m...

Похожие товары

	API Standard Flange Swing Check Valve	Продавец: Wenzhou Chenyu Valve Co., Ltd	Flange Swing Check Valveis a specific and widely used type of Check Valve. Its primary function i...
	Triple Eccentric Flange Butterfly Valve	Продавец: Wenzhou Chenyu Valve Co., Ltd	The triple eccentric flange butterfly valvehas three eccentricities. The first eccentric shaft de...
	Casting Trunnion Ball Valve	Продавец: Wenzhou Chenyu Valve Co., Ltd	Cast steel trunnion-mounted ball valvesfeature a split body design and can be customized or autom...
	Aftermarket Excavator Control Valves	Продавец: Colorful tower machinery co ,. ltd	Aftermarket Excavator Control Valves Our are precision-engineered hydraulic components desig...
	TILTING CHECK VALVE	Продавец: HEBEI LEFLOW IMPORT AND EXPORT CO., LTD.	TILTING CHECK VALVE Valve Size:DN200-DN1200Pressure Rating: PN10/16/25.Design & Manufacture:...