Ventilator Circuit Support Arm (Heavy Type)

• 

Pigeon MedicalCircuit Support Arm (Heavy Type) hook can offers ventilator accessories including our utility clamp that features three different ways of clamping - rail systems, poles, and table tops. The clamp can be used for many different purposes including holding blender bracket accessories, cylinder holders, and telescoping top IV Poles.An unsecured tube can create a hazard for both the patient and medical staff. Ensure a safe and secure connection from the ventilator to the patient at all times by using our stainless steel CS-arm for quality and safety.

Working Principle of Circuit Support Arm (Heavy Type)

Pigeon Medical Circuit Support Arm provides a secure connection for the Ventilator, CPAP and Anesthesia Machine breathing circuit that will be maintained at all times. The clamp of this heavy circuit support arm can be used for many different purposes including holding blender bracket accessories, cylinder holders, and telescoping top IV Poles. An unsecured tube can create a hazard for both the patient and medical staff. Ensure a safe and secure connection from the ventilator to the patient at all times by using our stainless steel CS-arm for quality and safety.

Features of Circuit Support Arm (Heavy Type)

Easy but lightweight.

Easy to operate.

Capable of holding at least 4lbs in either still or moving condition.

The special design ventilationarmshafts will not come off after as many as seven unfastening turns.

Pivot torque nut in center of hinges is capable of sustaining considerable torque, insuring support strength integrity

The friction rings are strong enough to tolerate the maximum tightening force without deforming or wearing out.

Shiny finished surfaces are easy to clean and maintain.

The flex pipe, when bent vertically or horizontally to a position at an angle as large as 30 degrees, will hold its position without any self-return movement.

Specification of Circuit Support Arm (Heavy Type)

We can also offer sorts of high flow oxygen blenderfor sale, if you have needs, please contact us.

Другие товары поставщика

	PN3000-XP70 Medical Suction Machine	Our PN-3000XP70 suction medical machineis innovatively designed, high negative pressure and low noise. The medical suction device is specially desi...
	Oxygen Analyzer Manufacturer	Oxygen Concentrator Analyzer for Sale Oxygen Analyzer is normally used to detect, monitor, and analyze the oxygen concentration of ambient air or ...
	Disposable Breathing Circuit With Heated Wire	Pigeon Medicaldisposable heated wire breathing circuitis made of medical grade polymer materials, non-toxic corrugated hoses which can be widely us...
	Adult High Flow Nasal Cannula	Pigeon MedicalNasal Cannula are designed to allow for patients with independent breathing and through provid high-flow, warmed, humidified breathin...
	Air Oxygen Blender Manufacturer	Pigeon Medical air and oxygen blenderis a device used by medical personnel to control the concentration and flow of oxygen for the rescue of patien...

Похожие товары

	HTT-02 Hot Tack Tester	Продавец: Cell Instruments Co., Ltd	The HTT-02 Hot Tack Testeris specifically designed to assess this property by measuring the stren...
	SPC-01 Stretch Film Peeling Cling Tester	Продавец: Cell Instruments Co., Ltd	The SPC-01 Stretch Film Peeling Cling Testermeasures the adhesion between two layers of stretch f...
	FTT-01 Film Thickness Tester	Продавец: Cell Instruments Co., Ltd	The FTT-01 FilmThickness Testerutilizes a mechanical scanning technique to measure the thickness ...
	TST-01 Tensile Tester	Продавец: Cell Instruments Co., Ltd	TST-01 tensile testers are suitable for conducting a variety of tests, including tensile strength...
	HST-01 Heat Seal Tester	Продавец: Cell Instruments Co., Ltd	HST-01 HeatSeal Testeris designed for laboratory use, to assess the heat seal ability of surfaces...