High altitude low pressure simulation test chamber

High altitude low pressure simulation test chamber

Altitude Chamber For Sale

Altitude Test Chambers

Temperature testing at altitudes up to 100,000 feet.

Grande can provide custom-built chambers for simultaneous testing of temperature and low-pressure altitude conditions. Two common applications are:

Testing of avionics or other aerospace equipment to simulate actual conditions it might experience.

Simulation of high-altitude conditions like might be found in mountainous regions.

NOTE: Altitudetestchambers are custom systems, and differing requirements may significantly change the cost and utility requirements. Please let Grandeknow as much detail as possible about your anticipated testing specification/method, and we can provide you with a tailored system for your requirements.

Features

Temperature range from -70 to 200°C

Altitude range from ground to 100,000 feet

Optional humidity control when altitude system is off

Chamber interior size specified by customer

Automatic altitude control, integrated with temperature controller—No manual setting of altitude level!

Vacuum pump sized for climb/dive rate required by application

Viewing window and cable ports available

Corresponding Standard of the Temperature and Humidity Test Chamber:

1. GB10590-89Low-temperatureand low atmospheric pressuretesting condition
2. 91-89 High-temperatureand low atmospheric pressuretesting condition
3. low atmospheric pressure technical condition
4. Low-temperatureand low atmospheric pressuretest chamber
5. High-temperatureand low atmospheric pressure test chamber
6. High-temperatureand low atmospheric pressure(Altitude) test

7,IEC60068-2-1.1990Testing methods of Low-temperaturetest chambers

8,IEC60068-2-2.1974Testing methods of High-temperaturetest chambers

9,IEC-540

10,ASTM D2436

11,JIS K7212

12,DIN 50011

13,BS2648

14,Mil-Std 202G (conditions 105C, A/B/C/F)

15,Mil-Std 810G (condition 500.5)

16,IEC 60068-2-39

17,IEC 60068-2-40

18,RTCA/DO-160F

19,JIS W 0812

Technical parameters:

Model No			GATC-150	GATC-225		GATC-408		GATC-800		GATC-1000
Working room(L)			150	225		408		800		1000
Inner chamber size(mm)W*H*D			500*600*500	500*750*600		600*850*800		1000*1000*800		1000*1000*1000
Exteriorchamber size(mm)W*H*D			1000*1600*1400	1000*1750*1500		1100*1850*1700		1500*2000*1700		1850*1600*2250
Packaging volume(CBM)			3							6
			320	350		400		600		700
Testing temperature range			-80°C,-73°C,-60°C, -40°C, -20°C, 0°C~+150°C, +200°C(300°C)
Performance	Temperature range		-65℃～150℃
			±0.5℃（Room pressure）
			±2.0℃（Room pressure）
	Heating up time		≤60min（+20℃～+150℃、RP、No-Load）
	Cooling down time		≤45min(RP)		≤60min(RP)				≤90min(RP)
	Pressure range		RP～0.5kPa
	Pressure control tolerance		±0.1kPa(≤2kPa)，±5%(2kPa～40kPa)，±2kPa(≥40kPa)
	Depressurization time		≤20min		≤25min		≤30min		≤45min	≤50min
Working environment			Temp：+5℃～+35℃；Humidity：≤90%RH；Airpressure：86-106kPa
Material		Exterior chamber materia	Stainless steel plate+ powder coated
		Inner chamber materia	SUS#304 stainless steel plate
		Insulation Material	PU Fiberglass wool
System		Air circulation system	Cooling fan
		Heating System	SUS#304 stainless steel high-speed heater
		Humidification system	Imported compressor,Tecumseh compressor(or Bizer Compressor),finned type evaporator,air(Water)-cooling condenser
		Dehumidification system	ADP critical dew point cooling/dehumidifying method
		Controlling system	TEMI880，990
Power kw			8		10		12		15	20
Water supply			Water temperature:≤30℃;water pressure:0.2～0.4MPa;flow rate:≥10T/h
Other components			Specimen holders 2pcs,electrical wire 1pc(3M),pressure testing port.
Safety protection device			Over-heat protection circuit breaker,Compressor overload protection,Control system overload protection,Humidifying system overload protection,Overload indicator lamp.
Power supply			AC 3Ψ380V 60/50Hz
Customized service			Welcome to Non-standard,Specail requirements,OEM/ODM orders.

Optional accessories

1,Low Humidity and Dehumidifying sytstem.

2,Inner glass door with manual operating ports.

3,Temp./Humi.Recorder.

4,Pure water treatment device

5,RS-485 interface can be linked to Personal computer(PC) and achieve multi-level control & recording software management.

6,Liquid nitrogen(LN2)/Liquid Carbon Dioxide(LCO2) fast cooling-down system.

Другие товары поставщика

	Three Zone Thermal Shock Test chamber	Three Zone Thermal Shock Test chamber Thermal Shock Test Chamber Liquid Thermal Shock Test Chamber Programmable Three Zones Thermal Shock Test C...
	Temp humidity and vibration test chamber	Temp humidity and vibration test chamber Temp humidity and vibration compatible Chambers Vibration Test Chamber Industrial-quality chambers for ...
	3-layers temp humi test chamber	3-layers temp humi test chamber Programmable Temperature And Humidity Test Chamber Temperature Humidity Test Chamber It is applied to test the m...
	Salt corrosion spray test chamber	Salt corrosion spray test chamber Configured for your specific tests Alternate Salt Corrosion Spray Test ChamberGrande makes rain and spray testi...
	Dust resistance test chamber	Dust resistance test chamber IP Dust Test Chamber Dust Resistance Test Chamber Wholesaler Applications： Dust resistance test chamber is designe...

Все товары поставщика

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...