fabric surface wetting resistance tester

• 

Water Repellency Tester is used to check the water repellency of the fabric by spray test in textile testing laboratory. Suitable for Table cloth, tapestry, flooring material fabric manufacturer or processors.Water repellency test method is applicable to any textile fabric, which may or may not have been given a water-repellent finish. It is very necessary for a manufacturer to test the water repellency ability of the fabric. This method is especially suited for measuring the water-repellent efficacy of finishes applied to fabrics.The water repellency ability of the fabric is tested with spray test. The Evaluation of the test is visual appreciation of the surface of the fabric (number of absorption points on the surface). It is very important to test the repellency of a garment worn in foul weather conditions. The more the repellency more comfortable the fabric will be during use. The repellency tends to decrease during washing, so a re-impregnation of a water repellent product is advised.

Standards:
ISO 4920, BS EN 24920, BS 3702, GB/T 4745, AATCC 22, M+S P23, NEXT 23

Product Dimensions：
1.Structure: stainless steel;
2. Surface treatment: spray paint;
3. Dimensions: 230 x 250 x 500mm (length x width x height);
4. Weight: 5 kg (11 lb)

Product Information:
The instrument comprises a metal framework allowing distilled water to be sprayed through a nozzle onto a test specimen at 45° and 150mm below the nozzle. The appearance of the specimen is compared against an standard photographic scale.
A certain volume of distilled water is sprayed into the center of the fixed sample. Strict quality control of the nozzle and the precise setting of the above height ensure the steady spray water flow and water form of the strict ensure to meet the requirement in the national standard. The height of the nozzle can be precisely set by using the provided height setting ruler.

Features:
1.The instrument structure is simple, mainly composed of main frame, funnel, nozzle, sample frame and sample fixator.
2.The nozzle has 19 evenly distributed holes, and the aperture is customized according to the standard. The 250ml water poured into the funnel can flow out from the nozzle in 25-30s.
3. The upper edge side of the sample rack ring forms an angle of 45° with the horizontal plane.
4. The center of the sample is 150mm from the nozzle.

Attachment:
Nozzle and rubber cover;
The water pan;
AATCC(22) rating standard chart card

Другие товары поставщика

	Launder-ometer /washing color fastness tester	IntroductionLaunder-ometer /washing color fastnesss tester can be used for washing, dry cleaning color fastness test. Double cylinder separation, r...
	Taber muiti-finger scratch tester	IntroductionTaber muiti-finger scratch tester - Model 710is used to measure the relative resistance or susceptibility of a material surface to scra...
	Automatic Wrinkle Recovery Tester	Wrinkle Recovery Tester Testing Standards: AATCC 128, ISO 9867, ENKA 3061 Applications: AATCC Wrinkle Recovery Tester is used to determine a fa...
	Average Particle Size Analyzer	The Average Particle Size Analyzer has a simple, fast and reliable technique for measuring average particle size. This measurement can not be easil...
	ASTM D5264 Ink Rub Tester (Rub & Abrasion Tester)	The instrument is used for testing the scuff, marking and rub resistance of cartons, films and commercial printed material. Ink Rub Tester (Rub &a...

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...