dry cleaner equipment for testing

• 

Dry Cleaning and Washing Cylinder, to determine color fastness to dry-cleaning and chlorinated pool water (AATCC 162), is applied to prepare samples for flammability testing of standard 16CFR-1610. Comprises stainless steel rotating test chamber of 7650ml capacity, variable speed drive with digital timer and displays. A drain valve is equipped in the bottom of the cylinder.

Testing Standards:
AATCC 162, 16 CFR Part 1610

Applications:
Dry Cleaning and Washing Cylinder is designed for determining color fastness to dry cleaning and chlorinated pool water. It also can be used to prepare samples for flammability testing.

Product Information:
Dry cleaning and washing cylinders are also known as dry cleaning tester and AATCC 162 tester. Dry cleaning and washing cylinder is used to test the color fastness of fabric to dry-cleaning and chlorine water washing. The Dry Cleaning And Washing Cylinder is comprised of stainless steel rotating test chamber with capacity of 7650ml, support frame, variable speed drive with digital timer.

Parameters:
1.Equipped with stainless steel rotating roller;
2.Height of tank: 330mm;
3.Diameter of in-tank: 220mm;
4.Rotating speed can be adjusted according to customer's requirements;
5.Overall dimension: 720×490×620mm(L×W×H);
6.Equipped with digital timer and displays;
7.Weight: 98kg.

Operation
Clean the dry cleaning cylinder
Prepare the hardness concentrates according to the relevant standards.
51 ml of the hardness concentrate was diluted to 5100 ml with distilled or deionized water.
If necessary, adjust the pH of the solution to 7.0 with sodium carbonate or acetic acid.
5000 ml of the solution (made in the above 3) was charged into a dry-cleaning cylinder. The temperature was adjusted to 21 ° C.
Put the color test sample with the standard test fiber into the cylinder, turn off the barrel, and roll for 60 minutes.
Get out the sample and remove the excess solution.

Technical Parameters
Items Parameters
Dimension 72L X 49W X 62H (cm)
Structure Stainless steel
Surface treatment Wiredrawing treatment
Transport weight 80kg
Power supply 220V 50HZ max.0.05A

Другие товары поставщика

	Friction charged charge tester	Used to determine the static conditions of the fabric in the form of friction in the laboratory conditions. The sample was charged with a predeterm...
	Medical Surgical Masks Air Exchange Pressure Difference Tester	TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ...
	Testfabrics Multifibre No.10	TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ...
	Medical Face Mask flammability Test machine	The Medical Face Mask Air Exchange Pressure Difference Tester is used for the determination of gas exchange pressure difference of medical surgical...
	Filter Tester MFP Nano Plus 4000	MFP Nano Plus 40000 with U-SMPS Real-time determination of fraction separation efficiency with two UF-CPC in raw and clean gas;MFP filter test rigs...

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...