IULTCS Rubbing Color Fastness Tester

• 

This instrument is used to test the rubbing fastness of leather surface under dry friction and wet friction as well as other test conditions. Basic principles: the square wool felt on friction head (with or without extra balance weights) makes reciprocating friction with leather (stretched or not stretched) on the friction platform for reciprocating friction. After a certain number of friction times, compare the wool felt with gray card and rate the color fastness level. Standards ISO 11640 Leather -- Tests for colour fastness -- Colour fastness to cycles of to-and-fro rubbing. SATRA PM 173 Reference standard of footwear testing content and methods. QB/T 2537-2001 Leather -- Tests for colour fastness --Colour fastness to reciprocating rubbing. DIN 4843 Safety Footwear; Safety Requirements, Testing QB/T 2226 Shoelace wear test method, light industry standards. GB/T 20991-7.3 Personal protective footwear test method. Consumables Friction material: White wool felt, size 15mm × 15mm. The punched pure wool felt piece should meet the following requirements: pH of water extract between 5.5 ~ 7.0; mass per unit area (1750 ± 100) g / m2, thickness (5.5 ± 0.5) mm. Technical Parameters 1, Test bench: a horizontal metal platform; a holder for fastening the leather to the platform, leaving approximately 80mm exposed; a device with which the leather may be extended 10% to 20% linearly in the direction of rubbing (sample size 120mm × 20mm). 2, Test column: weight (500 ± 25) g. It can be moved, but also firmly fixed. including: A) Test head area: 15mm × 15mm; B) Device for adjusting the test head to bring the felt pad into horizontal contact with the test platform; C) Load bearing blocks: (500 ± 10) g. After loading, the total mass of the test column is 1000g; D) Adjustment device: adjust the test column up and down so that the test head makes horizontal contact with sample. 3, Device that drives test bench for reciprocating motion: test head makes forward-backward motion with a stroke of 35mm ~ 40mm at a frequency of (40 ± 2) cycles / min. 4, Counter: LCD digital display, round-trip as one time, the number of cycles can be set to 5 to 500 times. 5, Device that can adjust the test column in the horizontal direction (optional): the test head can be rubbed against the leather samples at 2 to 3 different angles.

Другие товары поставщика

	Steaming Shrinkage Cylinder
	Floor Coverings Material Flammability Tester	TheFloor Coverings Material Flammability Testeris used to test the effects of a small source of ignition on floor coverings. It can be used for eit...
	Тестер бактериальной эффективности ASTM F2101 (BFE)	Эффективность бактериальной фильтрации для лицевых масок Тестер BFE предназначен для определения эффективности бактериальной фильтрации (BFE) медиц...
	China Medical Face Mask Fire Resistance Test Machine	This Medical Face Mask Fire Resistance Tester is mainly used to test the flame retardant performance of medical masks. The combustion performance o...
	Electronic Single Fiber Strength Tester	Single Fiber Strength Tester, suiting to test the tension strength and elongation of chemical fiber, cotton, wool, ramie, silk, glass fiber, fine m...

Похожие товары

	HTT-02 Hot Tack Tester	Продавец: Cell Instruments Co., Ltd	The HTT-02 Hot Tack Testeris specifically designed to assess this property by measuring the stren...
	SPC-01 Stretch Film Peeling Cling Tester	Продавец: Cell Instruments Co., Ltd	The SPC-01 Stretch Film Peeling Cling Testermeasures the adhesion between two layers of stretch f...
	FTT-01 Film Thickness Tester	Продавец: Cell Instruments Co., Ltd	The FTT-01 FilmThickness Testerutilizes a mechanical scanning technique to measure the thickness ...
	TST-01 Tensile Tester	Продавец: Cell Instruments Co., Ltd	TST-01 tensile testers are suitable for conducting a variety of tests, including tensile strength...
	HST-01 Heat Seal Tester	Продавец: Cell Instruments Co., Ltd	HST-01 HeatSeal Testeris designed for laboratory use, to assess the heat seal ability of surfaces...