Medical face masks Automatic Filtering Performance Tester

• 

The tester is used for performance testing of filter elements, disposable masks, filter media, etc. for respiratory protection products. It's suitable for safety testing of such products, basic filtration performance evaluation and development guidance for new products.
It is applicable to the performance verification of new products , quality control of the production department, and the of material properties for the third-party testing organization, the product performance verification laboratory, and the quality and technic al supervisiondepartment, etc.

Testing of Mask Material Filtering Performance：
With clean compressed air, the prepared NaCl solution or a similar solution such as DEHS/PAO are sprayed from the aerosol generator. After passing through a classifier (inertia principle), unneeded large particles are collected into the collection bottle, and particles meeting the requirements enter into the test system from the nozzle of aerosol generator.

Mask Automatic Filtering Performance Tester：
1. The aerosol emitted by the aerosol generator requires two treatments before reaching the tested filter material : 1. Produce aerosol salt particles by mixing with the heated gas (for salt spray). 2. Neutralize the static electricity carried by the aerosol through an electrostatic neutralizer, this treatment is to reduce the impact of particle loss and static electricity on the test results.
2. After the aerosol is processed by the above two treatments, it reaches to the surface of tested filer material at a certain flow rate (flow rate), and then the test procedure is started. For the filter efficiency test, the test time is very short, and it takes only a few seconds to complete the test. For the loading experiment, the experiment is relatively long. The particle counter or laser scattering photometer is used to measure the concentration or mass concentration of the upstream and downstream aerosol, and to calculate the filtration efficiency. At the same time,the pressure drop on both sides of the filter is measured by the differential pressure sensor.

Standards compliant：
NIOSH 42 CFR Part 84 Respiratory protection device;
EN 143 Respiratory protective device - particulate filters - requirements,
inspections and signs;
JMOL This protective mask standard;
GB 19083 Technical requirements for medical protective mask;
GB2626 Self-priming filter type anti-particle respirator;
GB 32610 Daily protective mask technical specifications.

Several Major Features：
Smart touch screen control + test report printing
PLC control system, more efficient and reliable, programmable 7-inch color LCD touch screen,Achieve a variety of functions such as control, detection, calculation and data display.

Multiple test fixtures：
The instrument has a variety of test fixtures that can test different types of masks.

High degree of automation：
The device is designed as a double control pneumatic clamping method, which is easy to operate and has high safety.

Powerful built-in function：
The equipment can test the penetration efficiency, penetration resistance and flow rate. At the same time, the flow pressure difference of the equipment can be set arbitrarily, thus satisfying various experiments, stable performance and good repeatability of test data.

Другие товары поставщика

	Filter Media Tester HMT 1000	Heatable modular test system for oil mist separators in accordance with ISO 20654 Quality assurance and the development of filters/separators/traps...
	Geotextile Plane Flow Meter	Introduction:In order to evaluate the water conveyance capacity of the material, the geotextile surface flow meter was used to measure the permeabl...
	Rain Tester and test machine	Testing Standards:AATCC 35, BS EN ISO 22958Applications:Rain Tester is designed for determining the water-repellent property of fabrics or composit...
	медицинская защитная маска маска для лица огнезащитные свойства тестер	Медицинская маска для рта Стандарт: GB 19083-2010 медицинская защитная маска технические требования Объем: Это специальное испытательное оборудов...
	ASTM E1354 Cone Calorimeter for Building Materials	StandardsApplication ISO 5660Reaction to fire tests-Heat release, smoke production and mass loss rate.ASTM E 1354Method of test for heat and smoke...

Похожие товары

	Disposable Dental Needles	Продавец: Shanghai Kohope Medical Devices Co., Ltd.	The dental needles manufacturing, also named disposable dental needles and tooth needles, are ass...
	ULTRASONIC STEEL PIPE TESTING EQUIPMENT	Продавец: Hebei tianxianghao metallurgical equipment manufacturing co.,ltd	Ultrasonic pipe testingwith ultrasonic pipe inspection equipmentrefers to a non-destructive testi...
	STEEL PIPE STORAGE RACK	Продавец: Hebei tianxianghao metallurgical equipment manufacturing co.,ltd	Metal Pipe Storage Racks This ms pipe storage rackmachine serves as a storage system for inspect...
	STEEL PIPE ROTATING ROLLER TABLE	Продавец: Hebei tianxianghao metallurgical equipment manufacturing co.,ltd	This equipment is suitable for the detection and repair welding process in the production of spir...
	STEEL PIPE END EXPANDING MACHINE	Продавец: Hebei tianxianghao metallurgical equipment manufacturing co.,ltd	Pipe expanding machineis a professional equipment for expanding and rounding the end of spiral su...