Dental material color stability tester

The Dentistry Base Polymer Search Stability tester is an instrument used to evaluate the

color stability of dental base polymers under different environmental conditions. A base polymer

is a material used for dental restoration and correction, such as dentures, braces, dentures, etc.

Due to long-term use and the influence of the external environment, these base polymers may

undergo color changes, affecting their beauty and durability. The color stability tester evaluates

the color change of the base polymer under these conditions by simulating different environmental

conditions, such as light, temperature, humidity, etc. Testers usually use standardized test methods

and parameters to ensure the accuracy and comparability of test results.

　　During the test, a sample of the base polymer is placed in a tester and exposed to

predetermined environmental conditions. The tester records the initial color of the sample

and re-measures the color of the sample after a certain interval. The color stability of the base

polymer can be assessed by comparing the initial color with the color of subsequent measurements.

The use of this tester can help dentists and technicians to select polymer materials with better

color stability, thereby improving the effectiveness and durability of repairs and corrections. At the

same time, manufacturers can use this tester to evaluate and improve the color stability performance

of their products.

Enforce standards

　　YY0270.1-2011 and YY/T0631-2008.

Technical parameter

　　Control system :PLC;

　　Operation interface: color touch screen, Chinese and English switch;

　　Light source: illuminance is 150 0001X----- accuracy is not biased to 10%;

　　Color temperature range :5000K-10000K;

　　Filter: transmittance greater than 90%;

　　Test box: Water temperature 0-99 degrees, test temperature 37 degrees,

water temperature can be adjusted with temperature display;

　　Clip :304 stainless steel clip outer diameter 50MM, thickness 0.5MM;

　　Polyurethane film: thickness of 50UM-- 0.5MM;

　　The device comes with a dial indicator :0-25.5MM, fine 0.01MM;

　　Standard :15L constant temperature tank, temperature 0-99 degrees.

Другие товары поставщика

	Contact lens oxygen permeability measuring machine	Product Introduction: Contact lens oxygen permeability measuring instrument (polarography) is designed for soft and hard contact lenses (contact l...
	Car seat headrest static strength tester	Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test methods" : This standard specifies the static strength...
	Particle Abrasion Tester	The Q-4D particle wear tester is specially designed as a standard instrument based on the national standard "Method for Determination of Wear Rate ...
	Metal Corrosivity Tester	standards GB/T 15970 ISO 7539 ASTM G31 GB/T 10125 Scope of Application The metal corrosivity tester is designed and manufactured in line with...
	High-temperature Vacuum Tribological Tester	Main uses: High temperature vacuum friction and wear testing machine is mainly used to study the friction and wear characteristics of materials in...

Все товары поставщика

Похожие товары

	Large Naïve VHH Library	Продавец: AlpVHHs	Large Naïve VHH Library VHHare single-domain antibodies derived from the variable regions o...
	pH-2398 pH/EC/ORP/Temperature multi-parameter Water Quality Tester	Продавец: Коллирон электроникс лимитед	Feature Large display screen, capable of simultaneously measuring water quality pH, redox potent...
	ORP-2026S Waterproof Soil ORP and Temperature Meter	Продавец: Коллирон электроникс лимитед	范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV...
	TDS-2616 Waterproof EC/TDS/Temperature Meter	Продавец: Коллирон электроникс лимитед	Range EC ～19.9mS TDS Temp 0～50℃ R...
	EC-98330 CF ECOstick - Nutrient Tester	Продавец: Коллирон электроникс лимитед	Ideal for hydroponics and agriculture applications, theNutrient Tester accurately measures the el...