Sock wear tester
Product Introduction:
Socks wear tester is a special equipment, mainly used to test the wear resistance of socks material. It evaluates the comfort and durability of socks by simulating the wear and tear of socks during wearing and rubbing, and is an important tool for quality control, product development and research in the textile and apparel industry.
Test principle and process:
The test principle of a sock wear tester usually involves fixing the sock sample on a specific device and conducting friction motion on the sample through a friction head in accordance with a preset trajectory and speed. After a certain period of friction, the wear resistance of the sample is evaluated by measuring the wear degree of the sample surface. During the test process, the weight loss, strength loss and other indicators of the socks can be recorded and analyzed, so as to comprehensively evaluate its wear resistance.
Equipment type and features:
Martindale Wear Tester: This is a commonly used sock wear tester that uses a Lissajous curve motion trajectory to evaluate wear resistance by the friction between the friction cloth and the sample. Easy to operate, accurate test, widely used in textile industry wear resistance test.
Schopper wear tester: The wear resistance of the sample is evaluated by measuring the wear degree of the sample in the process of rotating friction using the rotary friction method. Suitable for wear resistance test of various textiles, such as cotton cloth, synthetic fiber cloth, etc.
Linear wear testing machine: Using linear friction, suitable for testing the wear resistance of various materials, including plastics, rubber, coatings and so on. Wide test range and high precision.
For the testing of socks, Martindale wear testers are preferred for their applicability and accuracy.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Socks waterproof testing machine | Reference standard: HG/T 3664-2000, GB 25037-2010 and other standards Test principle: Pour air into the stocking through the air compressor to... |
 |
Safety Helmets Impact and Penetration Resistance Tester | Standard GB/T 2811-2019(China’s national standard for helmet safety and impact resistance) GB/T 2812-2006/XXXX(Testing methods for impact a... |
 |
Helmets Acceleration Impact & Penetration Tester | Standard GB/T 2812: Safety Helmets (China National Standard) Equivalent Compliance: ISO 6220-1 (Industrial Safety Helmets – Impact Absorp... |
 |
Powder Wet Vibrating Screen System For Lithium Battery Material Testing | tandard ASTM E11: Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves ISO 3310-1: Test Sieves – Technical Requirements... |
 |
Battery Powder resistivity meter | Product Advantages Unmatched Measurement Flexibility Dual-probe compatibility: Switch seamlessly betweenfour-point probe(for low-resistance m... |
Похожие товары
 |
Air Permeability Tester STD- F8 | Продавец: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Продавец: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Продавец: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Продавец: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Продавец: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
