Shoe stripping tester
Main uses:
The shoe stripping tester is mainly used to measure the bonding strength between the upper and the sole or other shoe components. By simulating the peeling forces that may be encountered in actual wearing, the adhesive parts of the shoes are precisely tested to ensure the quality and durability of the shoes. The equipment is widely used in all aspects of footwear production, including raw material screening, production process monitoring and finished product quality testing. The use of the tester can find and solve the problems in the production process in time, improve product quality and consumer satisfaction.
Meet the standard:
GB/T 3903.3 -- 2011
QB/T 4329-2012
Technical parameters:
Maximum stripping force: Indicates the maximum force that the tester can apply, usually 1000N or other specific values, to ensure that the tester can meet the test needs of different shoes.
Peel edge width: the width of the peel edge has an impact on the test results, usually 20±0.2mm or 10±0.1mm （there are also 30±0.1mm and 20±0.05mm and other specifications）， the specific width can be set according to the test requirements and standards.
Peeling knife edge down speed: indicates the moving speed of the peeling knife edge in the test process, usually 20±2mm/min, and the rising and falling speed is adjustable to ensure the stability and accuracy of the test process.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
STD Battery short-circuit tester | Product Introduction Battery Short Circuit Tester is a device that can be applied to the external short circuit test process of lithium ion batter... |
 |
Luggage rod reciprocating fatigue testing machine | Product Introduction: Luggage rod reciprocating testing machine for luggage rod reciprocating fatigue test. In the test, the specimen will be stret... |
 |
In situ expansion analysis system | Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measuring Systems ISO 12417-1: Mechanical Testing of Metals &nd... |
 |
Durability Tester for Automotive Wire Markings | Test Standard: Complies with the ISO19642 standard. Test Method: For the durability tester of automotive wire markings, fix a wire approximate... |
 |
Car seat components strength test bench | Applicable standards: The National Standard of the People's Republic of China （GB） : such asGB 15083, this standard specifies the strength require... |
Похожие товары
 |
Air Permeability Tester STD- F8 | Продавец: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Продавец: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Продавец: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Продавец: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Продавец: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
