Safety shoe impact testing machine

According to the criteria:

Bs-953,1870,EN-344,ANSI-Z41,CSA-Z195 ISO K88782

Product Advantages:

Measures Critical Safety Property: Quantifies the impact resistance of safety shoe toecaps, a fundamental requirement for protecting the wearer's feet.

Standard Compliant: Designed to meet numerous international and national standards (EN 344. ANSI Z41. CSA Z195. BS standards, etc.) for safety footwear impact testing.

Simulates Impact Hazards: Replicates the force of falling objects onto the toecap under controlled conditions.

Provides Objective Assessment: Allows for evaluation based on measurable criteria such as residual height and visual inspection for failure.

Accommodates Multiple Standards: Configurable to meet the specific drop hammer weights, falling heights, and impact energies required by different standards.

Robust and Durable: Constructed to withstand the forces generated during impact testing.

Essential for Certification: A necessary test for certifying safety footwear according to various protective standards.

Product Features:

Drop hammer mechanism capable of holding and releasing a drop hammer from a specified height.

Capability to use different standard drop hammer weights, such as 20$pm$0.2kg (for EN standards) and 22.7kg (for BS, ANSI standards).

Adjustable falling height for the drop hammer, with a range typically from 0 up to at least 1100mm (for EN standards).

System for achieving specific impact energies, such as 200 joules (for EN standards) and 100$pm$2 joules (for BS, ANSI standards), which are determined by the drop hammer weight and falling height.

Standardized impact edge on the drop hammer, with specifications varying by standard (e.g., 3$pm$0.1mm radius for EN, $phi$25.4mm for ANSI).

Anvil or baseplate on which the shoe is placed for the impact test.

Fixture or system for securely mounting the safety shoe in the correct position for the impact test.

Mechanism for measuring the residual height inside the toecap after the impact.

Electric motor (DC 1/4HP) for raising the drop hammer to the required height.

Robust and heavy construction (approximately 227kg) to ensure stability during impact.

Technical parameters:

Weight of drop hammer: （EN） 20±0.2kg,（BS,ANSI）22.7kg

Falling height: （EN） 0——1100mm

Impact capacity: （EN） 200 joules, （BS, ANSI） 100±2 joules

Impact edge: （EN）3±0.1mm（R），（ANSI）ø25.4mm

Horsepower: DC 1/4HP

Volume: 58.5×69.5×181.5cm

Weight: 227kg

Power supply: 1∮，AC220V

Другие товары поставщика

	Sublimation Fastness Tester Scorch Tester	Introduction Sublimation Fastness Tester is used for determination of color fastness performance to hot pressing ironing and dry heating (sublimat...
	Safety hat antistatic performance tester	Safety hat anti-static performance tester according to the new national standard GB/T 2812-2006 "Safety hat test Method", GB/T 2811-2019 "Safety ha...
	Pilling assessment viewer	Universal pilling pilling viewer/Pilling Pilling Rating tester By comparing the sample to the standard card under the specified light source to obt...
	Voltage Drop Tester for Automotive Wire Connectors	Voltage Drop Tester for Automotive Wire Connectors - Other test instrument - standard Product Information: The voltage drop tester for automotive...
	American Standard Whirlpool Shrinkage Dryer	Brief Introduction Whirlpool 3LWED4900YW - American Association of Textile Chemists and dyeing of Jurists (AATCC) approved standard shrinkage test...

Все товары поставщика

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...