Reciprocating Friction and Wear Testing Machine

Materials Science Research

Research the friction and wear properties of various materials, including metals, non - metals, and composite materials. Provide support for material improvement and optimization based on test data, and drive the research and development of new materials.

Mechanical Engineering Applications

Evaluate the wear resistance of key mechanical components such as engine pistons, gears, and bearings. Predict their service life and performance in actual use, assist in optimizing mechanical designs, and enhance product reliability and durability.

Aerospace Field

Study the wear resistance of spacecraft materials, simulate friction conditions in extreme environments, assess the abrasion - resistance ability of materials, and ensure the reliability and safety of spacecraft.

Automotive Manufacturing Industry

Test the wear resistance of automotive components like brake pads, tires, and engine parts. Evaluate their wear - resistance and durability in practical use to improve the quality and performance of automotive products.

Applications in Other Industries

In industries such as coatings, plastics, decorative fabrics, automotive interiors, and tufted fabrics, detect the scratch - resistance and wear - resistance properties of materials, providing support for product quality control and performance enhancement.

Applicable Standards

ASTM Standards: Formulated by the American Society for Testing and Materials (ASTM), standards such as ASTM D6079 are used to evaluate the friction coefficient and anti - wear properties of lubricating oils. ISO Standards: Standards like ISO 12156 established by the International Organization for Standardization (ISO) are also applicable to these tests. National Standards: In China, the tests may need to comply with the GB/T series of national standards, which have detailed provisions on testing methods, conditions, data processing, etc. Industry Standards: Depending on specific application fields and testing requirements, certain industry - specific standards are also involved. These standards are developed according to the testing requirements for specific materials or application areas.

Technical specifications

Maximum stroke of the actuator： 280 mm

Max. sliding speed： 100 mm/s

Maximum repetition rate： 0.3 Hz

Load range： 20-2500 N

Cyclic load amplitude： Up to 50% of set point

Cyclic load type： Sine or Triangle

Cyclic loading rate： 1 HZ max.

Pneumatic bellows capacity： 420 N/bar

2500 N air pressure： 6 bar

Friction： 0-50N and 0-2000N

Displacement： 0-2.5 mm

Resolution： 1 um

Oil pool： max. temperature 200°C

Data acquisition (high speed)： 16 bit resolution at 100 KHz sampling frequency max.

Другие товары поставщика

	Fabric drilling machine	Applications: Electric heating drill is applicable to drill the hole of mark in tailor process of cloth, also usded for fixing a pile of fabric ...
	Mask BFE Testing Machine	Mask BFE Testing Machineis used to test the percentage of material containing bacterial suspended particles at a specific flow rate. Features:...
	KES - FB2 - A Bending Tester	Content The Pure Bending Tester analyzes hand movements-referred to as “bending”-performed by artisans and professionals when judgin...
	Cleanliness Analysis System	Production： The cleanliness analysis system fully complies with the requirements of standards such as VDA19.1 - 2015. ISO16232. ISO4406. ISO4407. ...
	Racing ball rating tester BS 5811 BS EN ISO 12945	Standards: BS 5811; BS EN ISO 12945; ASTM / D 3512; ASTM / D 4970; ASTM / D 5362; IWSTM 152; Next TM 19/26 Applications: Martindale pilling test...

Все товары поставщика

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...