Vacuum Ball - Disk Friction Tester

• 

Main Purposes of Vacuum Ball - Disk Friction Tester

The vacuum ball - disk friction tester is a device specifically used for evaluating the sliding friction coefficient of point contact and the wear life of materials under vacuum and different atmospheric environment conditions. Its main purposes include:

Material Friction Performance Evaluation

- Simulate the actual friction conditions of materials in a vacuum or specific atmospheric environment, test the friction coefficient of materials, and evaluate their friction performance. - Test the friction behavior of materials under different loads and speeds to obtain friction performance data, providing a basis for material research, development, and optimization.

Wear Life Testing

- Calculate the wear life of materials by measuring the friction and wear conditions when the ball specimen rotates on the disk specimen. - Evaluate the performance changes of materials during long - term friction and wear processes, providing support for the assessment of material reliability and durability.

- Friction tests can be carried out in a vacuum environment to simulate the friction behavior in special application scenarios such as space and the nuclear industry.

- By adjusting the atmospheric environment, such as argon, nitrogen, etc., study the influence of different atmospheres on the friction performance of materials.

Lubricating Film Performance Evaluation

- For lubricating film materials, their wear life can be evaluated by testing the number of rotations before lubrication failure.

- Study the friction performance of lubricating films under different conditions to provide support for the research, development, and optimization of lubricants.

When the vacuum ball - disk friction tester conducts tests, it may need to comply with the following relevant standards or specifications (the specific standards may vary depending on the instrument model and application field):

Material Performance Testing Standards

Performance testing standards for specific material types, such as metallic materials, polymer materials, ceramic materials, etc.

Vacuum Environment Testing Standards

Such as standards and specifications regarding vacuum degree control and atmospheric environment simulation.

Technical parameters:

Test standard: ASTM G99 G133 G59 G102 G119

Load: 0.25-200N

Speed: 0.1-3000rpm

Friction: 100N

Size: 650mm*400mm*700mm

Weight: 80KG

Power supply: 220V/50Hz

Другие товары поставщика

	RPP Radiation Thermal Protection Performance Tester	Product Information: The RPP radiation protection performance tester is used to measure the amount of time that the radiation heat source penetrat...
	Helmet Webbing Micro - displacement Abrasion Tester/ Helmet strap friction tester/ Helmet Webbing Friction Tester	Ensuring Helmet Integrity: The Helmet Webbing Micro-Displacement Abrasion Tester In the world of protective headgear, the webbing system within ...
	Wire Torsion Tester	Applicable standards: GB/T 239.1-2012 "Metal materials wire Part I unidirectional torsion test method" GB/T 239.2-2012 "Metal materials wire Part...
	Helmet UV pretreatment box	Helmet UV pretreatment box - Other test instrument - standard Standards: Applications: Product Information: Product Introduction:...
	Small Parts Tester	Test Procedure: 1. Place test object under its own weight into the small parts tester in multiple orientations. 2. If the object fully submerges ...

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...