System of Spinal Pedicle Screw-Rod System Torsional Fatigue Tester

• 

Standard

• YY/T 0857-2011 (China): Specifies torsional fatigue testing protocols for spinal pedicle screw-rod systems, including load ratios, frequency, and failure criteria.
• YY/T 1560-2017 (China): Defines methodologies for evaluating the fatigue strength of spinal implant assemblies under complex loading.
• ASTM F1717-18 (International): Standard test methods for spinal implant constructs in vertebrectomy models.
• ASTM F2706-19: Specifies static and fatigue testing requirements for occipito-cervical and occipito-cervico-thoracic spinal implants.

Product Advantages

1. Multi-Axis Torsion Control: Advanced electromagnetic actuators maintain R=-1 load ratio (fully reversed torsion) with ±0.05% accuracy.
2. 5 Million Cycle Endurance: Proven capability to complete YY/T 0857’s 5×10⁶-cycle fatigue test without calibration drift.
3. Dynamic Angle Control: 0.001° resolution ensures precise replication of physiological spinal motion.
4. Real-Time Fracture Detection: AI-powered acoustic emission monitoring identifies micro-cracks at sub-millisecond intervals.
5. Intuitive Workflow: 21.5” capacitive touchscreen with gesture control and pre-loaded SOPs for 10+ implant geometries.
6. Modular Environmental Chambers: Quick-swap pods for simulated physiological (-20°C to +50°C) and corrosive environment testing.

Product Features

• Electromagnetic Servo Motors: Dual-axis torsional actuators (±180° rotation, 50 Nm peak torque).
• 6-DOF Kinematic Simulation: Replicates natural spinal motion (flexion/extension ±20°, lateral bending ±15°, axial rotation ±10°).
• Dynamic Load Control: 0.1–5 Hz frequency range with programmable waveforms (sine, square, random, custom).
• Thermal-Mechanical Chamber: ±0.3°C temperature stability with integrated humidity control (10–95% RH).
• High-Speed Imaging Ready: Syncs with external cameras for full-field strain mapping (DIC optional upgrade).
• Safety System: Triple-redundant emergency stop, overload clutches, and laser-based specimen breakage detection.

Technical Parameters

Accessories

1. Spinal Implant Fixture Kit:
   • Self-centering pedicle screw clamps (4.5–7.5 mm diameter compatibility)
   • Rod-bending jigs with laser-aligned loading anvils
2. Thermal-Mechanical Chamber:
   • 20L capacity with rapid cooling/heating (15°C/min)
   • 316L stainless steel interior with HEPA filtration
3. TorsionMaster Pro Software:
   • Automated S-N curve generation and fatigue limit calculation
   • 21 CFR Part 11-compliant audit trail with blockchain timestamping
   • Remote monitoring via dedicated iOS/Android app
4. Operator Kit:
   • Calibrated torque wrench set (0.5–50 Nm)
   • Specimen alignment gauges (ASTM F1717 compliant)
5. Calibration Bundle:
   • NIST-traceable torque calibration weights
   • Angular encoder verification tool
6. Safety Kit:
   • Laser safety curtains
   • Acoustic enclosure with 30 dB noise reduction

Другие товары поставщика

	Fabric vertical burn tester	Fabric vertical burn tester - Flammability Testing equipment price quotation - standard Standards: ASTM D6413, CALIF TB117, DOC-FF 3/71, 16CFR ...
	Leather thickness tester	Product Introduction: The Leather Thickness Tester boasts an impressive measuring range of 0 to 4 mm, with a division value of 0.001 mm, allowing ...
	Digital display electronic ink viscosity meter	How it works: The working principle of the digital display electronic ink viscosity meter is based on two tin (usually a metal roller and a rubber...
	Contact Heat Property Tester ISO 12127 EN 702	Standards EN 702 Protective clothing-protection against heat and flame– Test method: Determination of the contact heat transmission through ...
	Respiratory Resistance Tester	Respiratory Resistance Tester Introduction: The respiratory resistance tester is used to determine the inspiratory and expiratory resistance of re...

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...