.

Filter Flow Resistance Tester

Meet the standard:

ISO 3968

SAE J806

Product Introduction:

The Filter Flow Resistance Tester operates by circulating a test fluid (such as hydraulic oil, lubrication oil, fuel, water, or air, depending on the filter's intended application) through the filter element or complete filter assembly under test. A variable speed pump or flow control valve is used to establish and control a range of flow rates through the filter. Pressure sensors or transducers are strategically placed immediately upstream and downstream of the filter to measure the pressure on both sides. The difference between these two pressure readings is the pressure drop across the filter at that specific flow rate. The tester systematically measures the pressure drop at multiple flow rates across the filter's operating range.

The instrument is used for:

Determining the clean filter pressure drop versus flow rate characteristics of filter elements and assemblies.

Comparing the flow resistance of different filter designs, media, and manufacturers.

Selecting filters based on acceptable pressure drop limits for a given system flow rate.

Validating filter specifications provided by manufacturers.

Optimizing hydraulic or lubrication system design to minimize energy losses due to filtration.

Quality control during filter production to ensure consistent flow characteristics.

Research and development of new filter media and designs with lower flow resistance.

Product Advantages:

Provides objective, quantitative data on a filter's resistance to fluid flow when clean.

Essential for accurate filter selection and system design based on pressure drop limitations.

Helps optimize system energy efficiency by characterizing pressure losses across the filter.

Standard compliant test methods (ISO 3968 is a key standard) ensure comparable and reliable results.

Product Features:

Based on typical Filter Flow Resistance Testers:

Test fluid reservoir.

Variable flow rate pump or flow control system capable of generating and maintaining stable flow rates through the filter over a specified range.

Filter housing or fixture designed to securely hold the filter element or complete filter assembly under test, with connections for upstream and downstream pressure measurement.

Pressure transducers or sensors located upstream and downstream of the filter to measure pressures.

Differential pressure transducer (often included) to directly measure the pressure drop across the filter.

Flow meter to accurately measure the test fluid flow rate.

Temperature control system for the test fluid to ensure testing is performed at a consistent and relevant temperature, as viscosity affects pressure drop.

Main parameters:

  1. System pressure gauge range: 30bar

  2. Use of working medium: SAE5W engine oil

  3. Pressure rise accuracy: 0.5bar/sub-increment point

  4. Measuring temperature range: room temperature

  5. Protective cover: transparent


Отправить запрос, связаться с поставщиком

Кому: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Minimum Ignition Energy (MIE) – Dust Cloud Tester/ IEC 61241-2-3 Dust Ignition Tester/ MITC Dust Explosion Tester
Minimum Ignition Energy (MIE) – Dust Cloud Tester/ IEC 61241-2-3 Dust Ignition Tester/ MITC Dust Explosion Tester Description: Dust Cloud Minimum Ignition Energy Tester disperses a certain mass of dust specimen to be tested into the Hartmann tube device thro...
FPC Flex Durability Tester
FPC Flex Durability Tester Technical parameters: 1. Test station :1 2, test Angle: 10-180 degrees (touch screen digital setting) 3, test speed :10-120 times/min (touch...
Anti Synthetic blood penetration tester  ISO 16603  ISO 16604
Anti Synthetic blood penetration tester ISO 16603 ISO 16604 Standards: ASTM F1670; ASTM F1671; ASTM F903; ISO 16603; ISO 16604; GB 19082; YY/T 0689; YY/T 0700; Applications: It is applicable to the resist...
Geotextile Opening Size Tester (Wet Sieving) ISO 12956  ISO 8124-4
Geotextile Opening Size Tester (Wet Sieving) ISO 12956 ISO 8124-4 Standards: ISO 12956.GB/T 17634.SL/T 235.ISO 8124-1.ISO 8124-4 Applications: Geotextile Opening Size Tester (Wet Sieving), to determine the char...
Zipper Slippage Tester
Zipper Slippage Tester Applications: Used for testing light slippage for zipper of metal, plastic and nylon zipper. Test method: According to the internationally pre...
Все товары поставщика

Похожие товары

KL‑016A Benchtop High‑precision pH Meter
KL‑016A Benchtop High‑precision pH Meter Продавец: Келийлонг Электронные Акционерные Компании Product Description: Large‑screen display with high resolution and precision for con...
Large Naïve VHH Library
Large Naïve VHH Library Продавец: AlpVHHs Large Naïve VHH Library VHHare single-domain antibodies derived from the variable regions o...
pH-2398  pH/EC/ORP/Temperature  multi-parameter Water Quality Tester
pH-2398 pH/EC/ORP/Temperature multi-parameter Water Quality Tester Продавец: Коллирон электроникс лимитед Feature Large display screen, capable of simultaneously measuring water quality pH, redox potent...
ORP-2026S  Waterproof Soil ORP and Temperature Meter
ORP-2026S Waterproof Soil ORP and Temperature Meter Продавец: Коллирон электроникс лимитед 范围 ORP -999~999mV Temp 0~50℃ 分辨率 ORP 1mV...
TDS-2616  Waterproof EC/TDS/Temperature Meter
TDS-2616 Waterproof EC/TDS/Temperature Meter Продавец: Коллирон электроникс лимитед Range EC ~19.9mS TDS Temp 0~50℃ R...