Textile Air Permeability Tester

• 

Meet the standard:

ASTM D737

ISO 9237

EDANA WSP 070.1

JIS L1096

Product Introduction:

Air permeability is defined as the volume of air that passes through a unit area of a textile fabric in a given time under a prescribed pressure difference across the fabric. A Textile Airflow Resistance Tester provides a quantitative measure of this property.

The testing process involves clamping a specimen of the textile fabric into a test head, ensuring that the area surrounding the test region is sealed. A controlled airflow is then directed through the fabric, typically by using a vacuum pump to draw air through the specimen or a pressure source to push air through.

The instrument maintains a constant, specified pressure difference across the fabric specimen. Simultaneously, the volume or rate of air passing through the fabric is accurately measured by a flow meter.

The air permeability is calculated automatically by the instrument's software based on the measured airflow rate, the test area of the specimen, and the applied pressure difference, and is typically reported in units such as cubic feet per minute per square foot (ft³/min/ft²), cubic centimeters per second per square centimeter (cm³/s/cm²), or liters per square meter per second (L/m²/s). The test is usually performed on dry, conditioned specimens. Different test heads with varying orifice sizes are available to accommodate fabrics with a wide range of air permeability.

The instrument is used in laboratories for:

Measuring the air permeability or airflow resistance of woven, knitted, non-woven, and coated textile fabrics.

Assessing the breathability of fabrics for clothing, sportswear, and protective wear.

Evaluating filter media performance based on air permeability.

Quality control during textile manufacturing to ensure product consistency.

Research and development of new textile materials with specific airflow properties.

Comparing the air permeability of different fabrics.

Product Advantages:

Provides objective, quantitative measurement of textile air permeability/airflow resistance.

Essential for assessing fabric breathability and openness.

Important performance parameter for technical textiles, filters, and apparel.

Standard compliant test methods (ASTM D737. ISO 9237) ensure reliable and comparable results.

Useful for quality control, material comparison, and product development.

Helps meet performance specifications for various textile applications.

Другие товары поставщика

	Vacuum Ball - Disk Friction Tester	Main Purposes of Vacuum Ball - Disk Friction Tester The vacuum ball - disk friction tester is a device specifically used for evaluating the slidin...
	Carpet Static Electricity Tester	Main Applications The carpet static electricity tester (walking test) is mainly used for the anti - static testing of carpets and other floor cove...
	Convective Heat Resistance Tester	Convective Heat Resistance Tester - Textile and Apparel - standard Standards: ISO 17493 Clothing and equipment for protection against heat - Te...
	Automatic flapping machine	Patting mode： The flappingmode of the eqaipment is symmetrical balance mode, which is characterized by the diversity offiapping force fordownand c...
	Fully Automatic Closed Mouth Flash Point Tester	Meet the standard: ASTM D93 ISO 2719 IP 34 ASTM D7236 Product Introduction: The flash point is a critical parameter for classifying flammab...

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...