Velcro Fatigue Tester

Product Information:

Velcro Fatigue Testeris designed for opening and closing the hook and loop fasteners, A hook and loop fastener is repeatedly opened and closed for a specified number, and then is rolled by a roller to the hook side and the loop side to stick closely so as to determine the adhesive force and strength. This machine has a memory function. You can adjust the force applied to the specimen by adjusting the counterweight and load.

Standards:

DIN-3415、SATRA TM123、ISO 22776、GB/T 3903.20、GB/T 3903.21、GB/T 23315-2009

Technical Parameters:

1. Wheel diameter: the previous round φ162.5mm, the next round φ160mm;

2. Wheel width: 70mm;

3. Rolling speed: 60rpm / min;

4. Fixture slot: width 4mm, length 55 ± 2mm;

5. Reverse time: 30s reverse;

6. Tests: 5000 times;

7. Load: 5kg;

8. Counter: Counter: LCD liquid crystal display, 0-999999;

9.HP: AC1 / 8HP dual-frequency motor;

10. Instrument material: stainless steel;

11. Surface treatment: painting;

12. Volume: 70 × 47 × 60cm;

13. Weight: 51kg;

14. Power: AC220V, 50HZ, 5A.

Standard configuration:

Velcro fatigue testing machine 1 Taiwan

5kg weight 1

Power cord 1

Features:

1. Determine, opening and closing strength;

2. Digital reading;

3. Construction, in compliance with the standards ;

4. Velco Strips Test weights are supplied with tester;

5. Can be used with every kind of Velcro strips;

6. Rotation – Meter provides the pre-determined number of tests;

Другие товары поставщика

	EN sole zigzag testing machine	Product Introduction: The EN sole bending tester is used for 90 degree bending test of the sole of rubber, EVA and other zigzag shoes to detect it...
	Mask Tensile Testing Machine	Standards: GB/T 3917.2 Textiles-Tear properties of fabrics-Part 2 Determination of tear force of pants shaped test specimens (single slit) GB/T ...
	Multiple Times Pass Test Bench	Multiple Times Pass Test Bench - Filter material testing instruments price and quotation - standard Standards: ISO16889:2008 Industrial trucks ...
	Helmet Surface Friction Testing Machine	Purpose The Helmet Surface Friction Tester presses a helmet onto a movable fixture with a certain force. The surface of the fixture is attached wi...
	Intramedullary Nails Four - point Bending Fatigue Tester	Standard YY/T 0591-2011: Chinese standard specifying bending fatigue test methods for intramedullary nails and locking screws, including load ap...

Все товары поставщика

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...